Bravo 111 Transom Cutout Drawing

[Willallison]

I'm looking for a drawing (scale &/or dimensioned) for the transom cutout &/or transom plate for the Mercruiser Bravo 111 drive.....

There is an excellent resource available at http://www.brunswickmarineemea.com/d...main?type=corp but I haven't been able to find what I'm after.....

IF IT IS ONE OF THE NEWISH CO cUMMINS mERCRUISER, DID YOU TRY THE SITE?, whoops scuse caps
http://www.brownmarine.com/PDF/4.2_ES_250.pdf, thsi is the 2 leg, I am too bizzy go to 3)

[Willallison]

Thanks Jack, in this instance it's Yanmar 6BY, but the cutout should be common to all. I've looked at every link I can find, but none show the transom cutout - including the one you posted. There is a pattern in with the engine, but it's packed away and I can't access it at the moment.

Originally Posted by Willallison

Thanks Jack, in this instance it's Yanmar 6BY, but the cutout should be common to all. I've looked at every link I can find, but none show the transom cutout - including the one you posted. There is a pattern in with the engine, but it's packed away and I can't access it at the moment.

ok go to Cummins merc in nz, get a tel number and I will call em for you, nz is more switched on, has to be the comp is fierce,