Boat Design Forums  |  Boat Design Directory  |  Boat Design Gallery  |  Boat Design Book Store  |  Thanks to Our Site Sponsors

Go Back   Boat Design Forums > Design > Powerboats
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 06-26-2006, 01:23 PM
440Charger 440Charger is offline
 
Join Date: Jun 2006
Rep: 10 Posts: 2
Location: Tampa, FL
I/O vs Outboard in Saltwater???

Hey,
I am looking to buy a new boat and have some questions on what I should buy. I am kind of new to boat mechanics, so I hope I can get some help from this forum. I live in Tampa FL and have been looking at Cuddy Cabin type cruisers. It is salt water were I currently go boating. My previous boat was an inboard Yamaha jet boat and did not fair well over the past 5 years. I have found some nice used (1-5 years old) Sea Rays, Larsons, Maxims, Charparral and a few others that have really caught my attention, but my friend keeps telling me that I/O drives do not hold up in the salt water at all and if I do not get an outboard, I will be facing constant mechanical problems. Is this true? Is there a good I/O unit I can go with that will hold up in the salt water? Any help is appreciated.
Reply With Quote
  #2  
Old 06-28-2006, 03:28 PM
Thunderhead19 Thunderhead19 is offline
Senior Member
 
Join Date: Sep 2003
Rep: 21 Posts: 504
Location: British Columbia, Canada
My experience has been that outboards these days are very reliable, and the maintennance and repair is easier and less expensive than IO. I have seen IO units around here that have lasted 6 or 7 years with only annual oil changes. They blow up after that. I suppose if someone was gentler than my boss on the IO units, and took better care of them (IE regular cleaning, inspection etc...) they would last a dozzen or so years. All motors need tune-ups and oil changes and cleaning and winterizing. It's just easier to do on outboards.
__________________
JDF


'"Forward, the Light Brigade!"'
-Alfred Lord Tennyson
Reply With Quote
  #3  
Old 06-28-2006, 04:58 PM
mr300s's Avatar
mr300s mr300s is offline
Junior Member
 
Join Date: Jun 2006
Rep: 10 Posts: 9
Location: punta gorda florida
I agree with JFD outboards are just easier. I have had them all, and I feel by far the better choice would be the outboard espically in Florida where I am at. And of course now days with the new four stroke outboards all the way up to 300HP you can't go wrong. They are much quieter, cruise around at low speeds, better on fuel mileage. Do yourself a favor and locate a boat with one or two outboards and go for it, a much better choice, but then thats my personal opinion. Hope this little bit of input helps you out

Bill
Reply With Quote
Reply



Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Outboard Motor Out-Mounts or Outboard Bracket Installation Recommendations Guest Powerboats 9 08-28-2007 04:54 AM
mounting outboard to inboard/outboard pcromien Powerboats 25 03-03-2007 12:46 PM
outboard backhoebob Marketplace 1 01-27-2006 02:39 AM
inboard/outboard to outboard fishboy Fiberglass and Composite Boat Building 2 09-22-2005 04:29 PM
Help with an outboard Nate1025 Boat Design 0 09-03-2005 04:14 PM


All times are GMT -5. The time now is 11:02 PM.


Powered by: vBulletin Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
Web Site Design and Content Copyright ©1999 - 2012 Boat Design Net