Boat Design Forums  |  Boat Design Directory  |  Boat Design Gallery  |  Boat Design Book Store  |  Thanks to Our Site Sponsors

Go Back   Boat Design Forums > Design > Powerboats
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read Most Recent Posts Gallery Images Search

Thread Tools Search this Thread Display Modes
Old 07-26-2007, 08:54 PM
Berryzn45 Berryzn45 is offline
Join Date: Jul 2007
Rep: 10 Posts: 1
Location: maryland
03' 3.0L mercruiser won't start, Need help!!!

So it started when the boat died out on the water, couldn't get it started again. It just cranks, no spark. I tried the old screw driver in the plug wire trick, We had spark one time. We got it running after fooling around with stuff. Now there is no spark coming from the coil. Here's all that is new or fixed
Rebuilt carb
ignition coil twice
ignition module
I checked the throttle cut off switch, it's good
Good battery
I noticed that the Tach stopped working right before all of this started. The marina said to disconnect it and then try, NO JOY! I read out pretty much every wire and the all seam to be good.

Fuel is not the problem, the carb is spraying just like it should. The kill switch read out good.

Don't know where to go from here, Any Ideas.
Thank you
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Mercruiser 496 Mag won't start sometimes?? talbert450r Boat Design 9 06-06-2007
10:59 PM 
Where to start! Rui_370 Wooden Boat Building and Restoration 1 10-22-2006
12:20 PM 
new mercruiser 3.0 wont start boatn Gas Engines 4 08-22-2006
10:01 PM 
80 Mercruiser 898 wont start dannysalmon Inboards 1 06-13-2006
10:32 PM 
Where to start Geckert Inboards 1 06-08-2006
08:11 AM 

All times are GMT -5. The time now is 04:19 PM.

Powered by: vBulletin Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Web Site Design and Content Copyright ©1999 - 2015 Boat Design Net