Boat Design Forums  |  Boat Design Directory  |  Boat Design Gallery  |  Boat Design Book Store  |  Thanks to Our Site Sponsors

Go Back   Boat Design Forums > Community > Open Discussion: All Things Boats & Boating > Post-Tsunami
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #76  
Old 03-03-2005, 10:05 AM
davidjgray davidjgray is offline
David Gray - Ace Marine
 
Join Date: Feb 2003
Rep: 27 Posts: 19
Location: Fife, Scotland
Hi Chaps

An update from Ace Marine - we have been working in collaboration with Jordan Boats, and manufacturer of plywood kit boats. We are moving to prototype stage on a small and simple to construct plywood kit boat, capable of carrying up to 14 people or 1 tonne of cargo. It may be powered by outboard or paddles.
The idea is to supply the vessels in flat pack form. All tools, glues, screws, and paints are supplied. All parts are pre-cut to the exact size, and the vessel can be completed within two days. We think the cost will be around $2000 per kit. Instructions will be in pictogram form. (think IKEA). The design meets RCD, ISO and MCA standards.

We would be happy to receive comments or notes of interest.

Cheers

David Gray
Reply With Quote
  #77  
Old 03-21-2005, 03:47 PM
johnbkk's Avatar
johnbkk johnbkk is offline
Junior Member
 
Join Date: Jan 2005
Rep: 10 Posts: 14
Location: Bangkok & Sydney
Hi, if you are on location, SL , Aceh Banda or Phuket, can you tell us if you have seen any new boats delivered yet?
Cheers,
john
Reply With Quote
  #78  
Old 03-21-2005, 07:28 PM
johnbkk's Avatar
johnbkk johnbkk is offline
Junior Member
 
Join Date: Jan 2005
Rep: 10 Posts: 14
Location: Bangkok & Sydney
Pangas from Rainforest Boats

Hi D'ARTOIS,
still no resonse from Rainforest Boats, amazing isn't it!

I'm surprised and disappointed, but will remember Rainforest if friends need a new Panga......... not!

They could have helped and made a profit but seem to lazy to bother replying to ANY emails.

Oh well, maybe more luck with the guys at Explorer, Malaysia.
Reply With Quote
  #79  
Old 03-21-2005, 08:08 PM
johnbkk's Avatar
johnbkk johnbkk is offline
Junior Member
 
Join Date: Jan 2005
Rep: 10 Posts: 14
Location: Bangkok & Sydney
Why not just any fishing boat will do
21 February 2005, Rome - Donations of fishing equipment intended to help tsunami-affected countries rebuild their fisheries sectors could cause problems, rather than alleviate them, if they are not carefully matched to local conditions and need, says FAO.

"Our past experience in emergency situations is that duplicated assistance and inappropriate gifts, no matter how well-intended, can actually impede relief and rehabilitation efforts," notes the Organization's Fisheries Department on its website.

How donated gear can be a burden

Fishers in the region affected by the tsunami, like those elsewhere, use gear that is spe******ed to match local fish stocks, sea conditions and customs -- and equipment donated from overseas may not match their requirements.

Donated nets could easily be the wrong size, too heavy, or of the wrong mesh gauge. At the same time, repairs to gear not common to a region will be virtually impossible due to unfamiliarity with the equipment and a lack of replacement parts.

Similar considerations should be kept in mind regarding donations related to ice plants, refrigeration and fish processing. Here the appropriateness of the technology to local conditions and the availability of repair expertise and spare parts are crucial.

"Unfortunately it's not a worst case scenario that donated gear is of no use -- it's a common scenario," Ross Shotton, a Senior Fishery Resource Officer at FAO, explains.

The burden that such inadvertently inappropriate donations can place on governments, line agencies and relief organizations can be overwhelming.

Equipment has to be sorted upon arrival. Its exact use may not be known and it would need to be evaluated for safety and functionality and to see if it matches local standards. Repairs may be required. But authorities in many of the communities hit by the tsunami do not have the capacity to take on such work, and so donated gear would end up warehoused -- or simply thrown away.

Not just any boat will do

Similarly, only fishing boats that match local fishing customs, techniques and conditions will be of use.

For example, FAO recently received an offer of wooden-hulled craft made of soft pine -- but while suitable to cold waters in the north, in the warm tropics pine hulls would quickly decay. Boats there tend to be constructed of fibreglass or hardwood.

At the same time, FAO says that to the maximum extent possible local suppliers and craftsmen should be relied upon to reconstruct fishing fleets, while inappropriate boat and gear types could harm the environment, doing further damage to underwater habitats.

According to Mr Shotton, those interested in helping should consider sending money --- and targeting that money to a known requirement.

He cited one case in which a fisherman's association in Europe offered to fund the building of two boats by local craftsmen in a tsunami-affected country as an example of appropriate aid.

"They'll be doing it in the area, so: no shipping costs, local materials would be purchased, local employment is generated, and the fisherman will be used to the sort of boat that comes along," he explained.
-----------
edit: Let's hope they don't use timber to add to the profits of the forest Mafia.
Reply With Quote
  #80  
Old 03-21-2005, 08:30 PM
johnbkk's Avatar
johnbkk johnbkk is offline
Junior Member
 
Join Date: Jan 2005
Rep: 10 Posts: 14
Location: Bangkok & Sydney
Duplicated post. Sorry.

Last edited by johnbkk : 03-21-2005 at 08:34 PM. Reason: Duplicate post. sorry.
Reply With Quote
  #81  
Old 11-19-2008, 10:41 AM
meltoninterest meltoninterest is offline
 
Join Date: Nov 2008
Rep: 10 Posts: 2
Location: florida
boat molds

does anyone know who might be interested in buying a good condition mold for 60-73 boats? AJs seablaster and other boats off this mold. appraised at 1.5 m2 will sell for 30 cents on dollar and include 50 mt travel lift. located in fl. don melton at 850 525 1587
Reply With Quote
  #82  
Old 11-19-2008, 10:43 AM
meltoninterest meltoninterest is offline
 
Join Date: Nov 2008
Rep: 10 Posts: 2
Location: florida
we have 1.5 m2 mold for sale in fl, ...for 30 cents on the dollar. will through in 50mt travel lift. AJs blaster and many others off this mold. located in fl. don melton at 850 525 1587. thanks
Reply With Quote
  #83  
Old 11-20-2008, 01:58 AM
gamage's Avatar
gamage gamage is offline
Senior Member
 
Join Date: Apr 2002
Rep: 41 Posts: 206
Location: COLOMBO
Quote:
Originally Posted by meltoninterest View Post
we have 1.5 m2 mold for sale in fl, ...for 30 cents on the dollar. will through in 50mt travel lift. AJs blaster and many others off this mold. located in fl. don melton at 850 525 1587. thanks
Pls send me detail offer to <anandagamage@yahoo.com> thks
Reply With Quote
Reply



Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
investor needed for a serious boat project Guest-3-21-09-10-33 Boatbuilding 0 02-18-2005 04:22 AM
Very Small Boat Project Question Rich M Fiberglass and Composite Boat Building 6 01-17-2005 09:02 AM
building polyethilene boat gesdim Fiberglass and Composite Boat Building 0 01-09-2005 08:50 AM
new free design & building project: YAGO 31' steel origami yawl yago Boat Design 1 08-21-2004 12:42 AM
project boat worth the time? wannalearn Sailboats 1 05-05-2004 05:58 AM


All times are GMT -5. The time now is 06:34 PM.


Powered by: vBulletin Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
Web Site Design and Content Copyright ©1999 - 2012 Boat Design Net