| ||||
|
#1
| |||
| |||
| service bulletins Does anybody have access to service bulletins for Mercury MerCarb for 1976 20 hp? (or any merc stuff at all, I own 3 of them. The 20 is the only problem child lately) Thank you |
|
#2
| |||
| |||
| I dont think there was any service informations of 76 20's... I'd be guessing but I owned one when I was an apprentice and dont remember re working anything. Not a bad engine as long as you keep it in fresh water. |
|
#3
| |||
| |||
| Yes, this one is in Michigan fresh water. I did find a pile of bulletins online, but nothing pertinent to the 20 hp, as you said. After all the necessary repairs I did to this one, I finally had the prop reconditioned. It had no obvious damage, but that was the only thing left. Wish I could have put a tach on it much earlier. Either the hub was slipping to some extent, or the blades were bent and not pumping solid water, allowing the engine to over-rev and the fuel pump apparently was not keeping up. No more fuel starvation at full throttle with the new prop. |
|
#4
| |||
| |||
| I have a 1975 Merc, 20HP. Absolutely Trouble Free. Bought it new and used quite often up to 10 years ago when I started using a larger Boat/Motor. |
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 2D&3d service | tz3dcom | Services & Employment | 0 | 02-21-2008 08:21 AM |
| 5Axis cnc Service | Subatomicgenius | Boat Molds | 3 | 07-21-2007 04:13 PM |
| Lamination Calc Service | JEM | Fiberglass and Composite Boat Building | 1 | 04-27-2007 09:59 AM |
| ferry service | catbaloo | Boat Design | 12 | 03-15-2005 01:34 AM |
| Rudder bearing service | kudu | Boat Design | 2 | 06-27-2003 11:14 AM |