| ||||
|
#1
| |||
| |||
| 225 Yamaha Guru Do we have a Member who is an absolute expert on the 225/2stroke Yamaha outboard. Part of my question is what causes the engine to run on one bank of cylinders only this problem is eratic but mainly when the engine is cold and wont change until it has warmed up. HELP |
|
#2
| ||||
| ||||
| Can you post the model/serial number of the engine?
__________________ Gonzo |
|
#3
| |||
| |||
| Not an expert...but it sounds like you are not getting spark to the bank. Moisture...loose connection....broken wire...etc. Once the engine warms the expansion makes the contact. |
|
#4
| |||
| |||
| you have 2 power packs and one is faulty !!take them both oFF and get them tested . ![]() MY SON HAD THE SAME PROBLEM AND THEY REPLACED BOTH POWER PACKS !! HAD THE OLD ONES TESTED AND ONE WAS intermitantly FAULTY SO KEPT THE good one FOR A SPARE
__________________ Making beautiful boats is a passion never a chore ! |
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Find-Guru connects Teachers and Students in a unique way | gonnalakshmi09 | Education | 0 | 09-23-2009 06:41 AM |
| Gray Marine 225?? | Dave B | Inboards | 7 | 02-08-2008 11:12 AM |
| Jim Bermark, the Guru of AutoCAD programming interviewed by Novedge | folini | Software | 0 | 08-28-2007 02:17 PM |
| Need Guru to smooth a Rhino Chair! | Grant Nelson | Software | 16 | 01-29-2007 08:20 PM |
| Omc 225 Problems | pumba8 | Inboards | 0 | 07-30-2006 11:16 PM |