NEED small outboard HAVE chopper gun

[Thin water]

i need a short shaft outboard (s) for projects I am working on. Must be in good working condition, 9.9 to 40 hp reasonable price and close to central florida. I have a chopper gun with one box of glass. The gun is offered for trade/sale for the motor or I can pay cash if you don't need gun. I also need a long shaft 8 to 25 hp long shaft for my son's boat.

The gun was cleaned the last time it was used about two years ago but the 55 gal of resin sitting on it gelled. I pulled out the pick up tube and will dispose of the resin.

The chopper gun is the entire unit including the big arm, caster deck for the resin, hoses etc... (it is not just the spray gun)

JIM

thinwaterboats@yahoo.com

[Thin water]

Chopper gun still for sale. Motors still needed. No inquiries so far.

JIM

[critesco]

hi, might be interested in the chopper gun you have, if you do still have it. thanks, bill c.

[Thin water]

Thanks for the interest but I am making airboat hulls with the gun now. If anything changes I will re list it.

JIM