Boat Design Forums  |  Boat Design Directory  |  Boat Design Gallery  |  Boat Design Book Store  |  Thanks to Our Site Sponsors

Go Back   Boat Design Forums > Design > Propulsion > Inboards
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 06-16-2007, 05:07 AM
martinwill martinwill is offline
Junior Member
 
Join Date: Mar 2007
Rep: 18 Posts: 14
Location: uk
Pump clutch ?

I have got a jabsco deck wash pump to be run on a belt off the engine, i have been told of electric clutches but cant find any info, have also been told i can run the engine with the belt loose and when i want to use the pump i tighten the belt with a tensioner on a cam, surely this would harm the belt. anybody got any ideas on how to fit some sort of clutch to the pump.
I dont think a centrifugal clutch (say off a go cart) would be suitable as the engine is low reving and would want to use the pump at just above tickover.
Reply With Quote
  #2  
Old 06-16-2007, 05:24 AM
Frosty's Avatar
Frosty Frosty is offline
Senior Member
 
Join Date: May 2002
Rep: 1514 Posts: 5,518
Location: Thailand
Its not common for cars in Uk to have airconditioning but some do. If yours has lift the bonnet and look at the front of the AC compressor,---that is an electric clutch 12v.

There a many shapes and sizes but you may find that one will fit your pump.

I would have thought that the Jabso dealer would know the model of the clutch required.

I have seen those pumps with a manual dog clutch.
Reply With Quote
  #3  
Old 06-16-2007, 08:32 AM
Guest625101138 Guest625101138 is offline
Previous Member
 
Join Date: Jan 2007
Rep: 0 Posts: 0
If you Google electric clutch pulley you should find a supplier in the UK.

Here is a link for the US:
http://www.zacm.com/brand/eleclutches.htm
Reply With Quote
  #4  
Old 06-17-2007, 03:43 AM
martinwill martinwill is offline
Junior Member
 
Join Date: Mar 2007
Rep: 18 Posts: 14
Location: uk
thanks for that, let the search begin.
Reply With Quote
Reply



Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
clutch ideas for 3m craft using 3x90cc 2stroke engines madtech Surface Drives 0 05-05-2007 05:01 PM
Looking for your thoughts.....and a pump gcunagin Jet Drives 7 02-06-2007 07:51 PM
vacuum pump miniscool Fiberglass and Composite Boat Building 14 01-29-2006 11:27 PM
Heat Pump => Vacuum Pump Inquisitor Boatbuilding 7 11-12-2005 10:29 PM
jet pump ROBY Boat Design 0 10-27-2001 06:45 AM


All times are GMT -5. The time now is 06:52 AM.


Powered by: vBulletin Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
Web Site Design and Content Copyright ©1999 - 2012 Boat Design Net