| ||||
| |||||||
![]() |
| | Thread Tools | Search this Thread | Display Modes |
|
#1
| |||
| |||
| Please help Im trying to be on the lake for the forth? I just got my first boat it has a 3.0 merc in it sup rebuilt. Heres my problem and Im in know way a mech. When I try to start it it cranks fine and runs as long as I hold the key in the starting pos. keeping the starter held when I let go of the starter it stops running. I know its bad on my starter so I need help before I burn it up! When I holding the starter I can give it gas and it reves up. But only when Im holding the starter???? Can anyone help? I have searched but have found anyone with the same prob! Im sure its something simple well I hope!!! Thanks guys Ive read alot and you guys know your stuff! |
|
#2
| |||
| |||
| By thr way its a 1990 glasstream 17.2 foot I guess bow rider it has seats on the bow? |
|
#3
| |||
| |||
| The first thing to check would be power to the coil with the ing. switch on. If theres no power with key on check the ing switch. You can test it with a volt meter. I've ran across this problem before and it turned out just to be a bad ing. switch |
|
#4
| |||
| |||
| Thanks Im not sure how to check it so Ill just buy a new one and see! If that isnt it oh well Ill have a new key! I was thinking that could be it! |
|
#5
| |||
| |||
| Hey good luck, that should fix the problem. |
|
#6
| |||
| |||
| Thanx, I hope so! I know its something simple like that, and Id rather buy one and check it out and I can always take it back! |
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Tragedy on Lake George | Evolution Yacht | Open Discussion: All Things Boats & Boating | 1 | 10-06-2005 08:54 AM |
| lake barge | texasboatbuild | Boatbuilding | 5 | 08-09-2005 09:33 PM |
| No More Lake X | Willallison | Open Discussion: All Things Boats & Boating | 0 | 03-30-2004 06:43 PM |
| Lake launch | Mike H | Sailboats | 1 | 02-04-2003 02:19 PM |
| Lake Launch | Mike H | Boatbuilding | 0 | 02-02-2003 06:31 PM |