 |  |
| Boat Design Forums | Boat Design Directory | Boat Design Gallery | Boat Design Book Store | Thanks to Our Site Sponsors |
| ||||
|
#1
07-10-2006, 05:46 AM
| |||
| |||
| Original Prop For 26' Pacemaker Sportfish? I own a 1978 26' Flybridge/Sportfish Pacemaker with a single 350 CID (260 HP), 1.52:1 transmission ratio. Would anyone know which size prop was originally provided by the manufacturer for this boat? Currently running a 15 X 11 medium cup 3-blade and is still slightly overpropped. WOT is 4000 RPM. Thinking I should be at about 4400 RPM WOT. This boat still don't have the speed other Pacemaker owners claim to have with same model, but most I've researched have a 1:1 tranny ratio. Thinking I should be running a 15 X 10 3-blade. Would really like to know what was originally supplied by Pacemaker for this setup. Thanks for any help. Bob  |
|
#2
08-21-2006, 08:27 PM
| |||
| |||
| Now running a 15 X 10 Medium Cupped wheel and hitting 4,300 - 4,400 RPM at WOT. Picked up a couple knots at WOT to 22 knots, boat has more power running head on into 2 - 3 footers, and engine now sounds much smoother thru all ranges (no more straining or lugging/growling). |
 |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 26' Chris Craft Sportfish For Sale | Corpus Skipper | Marketplace | 3 | 09-29-2007 03:36 PM |
| 26 pacemaker w/ 6v71 detroit | phishown | Propulsion | 1 | 12-18-2005 06:39 AM |
| Inner Keele replacment on a 39 ft Pacemaker | Bremner | Wooden Boat Building and Restoration | 5 | 05-23-2005 08:07 PM |
| Pacemaker Hull split | leokow | Fiberglass and Composite Boat Building | 5 | 11-20-2004 05:00 AM |
| 32 pacemaker | tom4660 | Boat Design | 5 | 06-04-2002 11:58 PM |
Linear Mode
