Low Cost Boatbuilding in Argentina

[Felix2001]

Buenos Aires, Dec. 5th, 2006
Dear boat designers,

We are in a position to offer building services in Argentina for completed hulls, parts, and even moulds build to other companies design, there is no technical or legal problem from this side. And our domestic cost are from 1/2 to 1/4 of cost in the EC depending on the type of boat and due to depreciation of our currency (1 Eu = 4 AR $) some years ago.

For reference, we are a group of senior profesional people with some 30+ years of experience - we are not newcomers, in the argentine pleassure boat market. A new export-oriented webpage is under construction to show the results of above experience, with pictures and videos of many succesfull boats designed and built by Naval Eng. Miguel PRESTERA from 25 to 64 feet LOA, large GRP Motor-yachts, and the new line of Open Cruisers for our domestic market like the Zorion 930 which prototype is almost finished now.


We must mention also the design and building of special boats like MARCO POLO 42 Ocean Trawler (2 units exported to Holland) a a fast RINO approved vessel that can support up to 110 degrees of heel and sail at top speed of 24 Knots. Also experience in custom design and built of RIB GRP hulls for clients in Europe; design and built of racing powerboats, work boats, fishing boats. A total of around 800+ GRP, wood and steel motoryachts afloat in Argentina has been designed and built by our Nav. Eng. Michael PRESTERA or by other well known boatbuilders in Argentina.

We will mail as attachment pictures of many of above where you can take a look on the quality of argentine-made boats, to any designer seriously interested in our professional services and friendly co-operaton. We
have also a DVD with many of these boats under sail (motor), and the new ZORION 930 Open Cruiser.

Interested parties please contact:


Dr. Felix Martinez
PRESTERA & MARTINEZ
TRIMARINE ARGENTINA
Beruti 3488, Buenos Aires,
1425 Argentina
Phone 54 11 4828 0974
Fax 54 11 4827 0064
E-mail: trimaran2001@yahoo.com

[roparen]

Dear Sir/Madam



We are looking for a manufacture to produce a range of Inflatable Rig. Boat to high standard European (Italy).



It is a very serious project for the European market with Italian design and specification. Range from 5 to 10 MT.



Design and production should be also sold and distribute on the Chinese market under our supervision and trade name.



If you are interested to have a serious conversation on this pls do not hesitate to contact me.



Pls specify your full addressed and contact.



Best Regards



R. Parenti

Via Ventimiglia 228

10127 Torino

Italy



MSN: roberto_parenti@hotmail.com