Infusion RTM ? Tips & Tricks ?

Erwan · #1 07-09-2007, 05:32 AM

Hi Everybody,

I am looking for a handbook of infusion construction methods, or any relevant references on this topics.

Thank in adavnce to everybody

Regards

EK

Splint · #2 07-09-2007, 09:38 AM

Andre Cocquyt from www.grpguru.com produces some very good DVDs on infusion. I went to a Technical College here in Australia and they had a copy of one of his DVDs which I was able to borrow. You may want to try a college in your area or maybe even a library. Composites suppliers will more than likely have educational material which they may sell/loan/give to you. Also have a look at http://compositeforum.werksberg.com and www.racingcomposites.net there are lots of people there willing to share their knowledge.

Cheers
Splint

Erwan · #3 07-09-2007, 12:41 PM

Thank you very much, your references are perfect, Now I have a starting point.

Thank you again

Cheers

Erwan

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sail wing tips?	AleX`G	Sailboats	7	04-09-2007 06:17 AM
Tips and tricks for perfecting your vacuum-bagging methods	duluthboats	Fiberglass and Composite Boat Building	0	02-23-2007 03:25 PM
Cold Molding Details and Tricks	Thumper	Wooden Boat Building and Restoration	7	01-19-2007 02:13 AM
RTM VS. Hand lay-up	Kovaceski	Fiberglass and Composite Boat Building	24	12-17-2006 10:34 PM
RTM versus VEC?	Splint	Fiberglass and Composite Boat Building	7	05-13-2005 06:35 AM