I want to study abroad,but which school?
I am a undergraduate in China(Harbin engineering univercity HEU),and my subject is Naval architecture and ocean engineering ,I want to study abroad for master or Ph.D,but I don't know much infromation obout the univercity & colledge abroad ,especially the school in the USA or Eourpe, so if you know some thing about academy in this field , Please give me some advices , Think you very much!
my mail : firstname.lastname@example.org
My gut feeling is loads of PRACTICAL experience and a can-do capability will get you further - - document achievements that are out there and doing an excellent job in what they were designed to do and are readily adapted to new challenges is what the future successes will have...
Try to be helpful...
Remember that there are at least two sides for every story...
Thank all of the above very much:
I know some schools in the field of naval architecture and ocean engineering from the internet ,but the information is very limited , so if someone know one of the schools below ,please give me you advise, is it easy to apply for them,for example,Thanks!
University of California–Berkeley
University of Michigan–Ann Arbor
University of California at San Diego
University of British Columbia
University of California at Santa Barbara
University of Texas at Austin
Norwegian University of Science and Technology(NTNU)
Royal Institute of Technology(KTH)
Technical University of Denmark(DTU)
University of Florida
Texas A&M University, College Station
Delft University of Technology
University of Hawaii at Manoa
University of Delaware
University of Connecticut at Storrs
University of Miami
University of Rhode Island
University of New Hampshire
University of Maine at Orono
University of New Orleans
University of Southampton
You need to decide what it is you want to study and focus on that, then select the best place that can deliver it to you.
The University of British Columbia would probably not have what you're looking for. Dalhousie University, in Halifax, Nova Scotia has a N.A. program and a Mar. Eng. program, I think. As you are in China, you might want to look at the school Mike Johns mentioned. As well, if you have drafting skills, you could probably gain more practical experience by working for one of the builders in Taiwan, Philippines, etc. . Best of luck!
if my choice, i would do my masters/PhD at Southampton Uni in the UK.
But i am biased, cos that's where i did mine.
You can find good universities in USA. These are some famous universities in USA. They give you good facilities in education and other facilities. You can try in these universities.
Golden Gate University
Pacific Oaks College
Grand Canyon University
english course in london
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Fairers wanted for work abroad||metallic||Services & Employment||5||06-26-2009 02:23 PM|
|Experienced Composite Engineer Looking for Work UK/Abroad||jakedfc||Services & Employment||0||05-04-2009 09:04 AM|
|Any jobs going abroad for a Yacht Spray Painter/Laminator||spraylami||Services & Employment||14||04-29-2009 07:50 AM|
|Grp Marine Laminator 17 Years exp. Looking For Work Anywhere In UK or Abroad.||facermark||Services & Employment||0||04-23-2009 04:03 PM|
|Searching for a job abroad ?||Impressive||Services & Employment||2||03-12-2008 05:37 AM|