| ||||
|
#16
| |||
| |||
| what are you planning using for gears with the 6.2L? |
|
#17
| |||
| |||
| gears for GM 6.2L diesel Does any one have any recommendation for transmission for the 6.2L. I think I have located an engine dealer who will sell a set, these came from a fleet of Hummers. |
|
#18
| |||
| |||
| A Borg Warner Velvet Drive will work fine with a marinized 6.2. Make sure you use a solid flywheel off a manual transmission engine instead of the flexplate. |
|
#19
| |||
| |||
| I am rebuilding a 36' 1979 pacemaker taking out 454s and replacing them with volvo diesels tamd63pa 360 hp. Along with going from 1 3/8 shafts to 1 3/4 and not sure that is big enough. This means larger struts and props. I am retired and work part time at a boat co. that parts out and scraps insurance totals needless to say how I get payed. I got the volvos out of new boat that burned in a marina fire and went down. The motors and tranies were pickled but a poor job. I took them compelety apart and having a diesel man put them up and running. A rebuild kit for the volvos east or west coast is $3300.00 ea. Any way you cut it it is a hole lot of work but kind of enjoyable. Good luck |
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 1976 Trojan 30 Repower | AggieBoater | Powerboats | 7 | 07-14-2005 02:18 PM |