Natural modes ANSYS AQWA 17.1

Discussion in 'Software' started by Balbastre, Mar 22, 2017.

  1. Balbastre
    Joined: Mar 2017
    Posts: 1
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: stockholm

    Balbastre New Member

    Hello everyone!

    I am designing a pontoon with a set of mooring cables in order to carry out a fatigue analysis of this. To do it, I think that is necessary to find the natural model of the system in order to obtain the biggest displacements of the structure and hence, the biggest tensions in the mooring cables.

    I have obtained the fundamental frequency of the pontoon without taking into account the set of mooring cables through ANSYS AQWA, however I don't know if it is possible to obtain the natural mode frequencies of the system. Does anyone have experience in this?

    Thanks in advance.
     
  2. b1ck0
    Joined: Mar 2010
    Posts: 128
    Likes: 3, Points: 18, Legacy Rep: 40
    Location: Varna/Hamburg

    b1ck0 Senior Member

Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.