 |  |
| Boat Design Forums | Boat Design Directory | Boat Design Gallery | Boat Design Book Store | Thanks to Our Site Sponsors |
| ||||
|
#31
07-26-2009, 10:29 AM
| ||||
| ||||
| Hi tomac, You cannot manually set the hull beam in Michlet. That would result in an "over-constrained" problem with conflicting parameters. You set the nondimensional offsets, displacement, waterline length, and draught (in that order). Michlet then computes the waterline beam from these values. It looks like this: # ============================ FIRST HULL ============================== # Offsets 0.0000,0.0000,...... 0.0000,0.1015,...... # Displacement Volume (cubic metres) 8350.0 # Length (metres) 142.0 # Draft (metres) 8.5
__________________ - Matt Marsh - Marsh Design (small craft blog and designs)  |
 |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Where can I get Michlet and Godzilla? | u4ea32 | Software | 0 | 02-17-2009 02:03 PM |
| Godzilla/Michlet question | coreym | Software | 9 | 02-23-2008 04:14 AM |
| Godzilla vs. Michlet | LP | Software | 4 | 01-25-2007 03:58 AM |
| Automating Michlet and running Godzilla | dave.k | Software | 1 | 01-02-2007 12:57 PM |
Linear Mode
