looking for tribon tutorials

[rohinit]

I have started learning tribon, can any one pronide me basic design tutorial kind of thing.
My e-mail is rohinit.raj@rediffmail.com

[zeroname]

hy

as you are from india. i think u can check this link

http://www.aveva.com/region.php?location=27

You can contact with them for purpose of training.
And to learn Tribon.. big job.. must need training. In india AFA i know , there is also some local tribon training centre.

Thanks

[AYM910]

Hi
I used Tribon 10 years, if you have questions please ask me.

[zeroname]

can u tell how i can import maxsurf design file to tribon and then do hydrostatic calculations and surface create?

[AYM910]

Before you must create surface in "Surface & Compartment". There is import file (. SAT). I did it from Rhino. But be careful Tribon work badly with imported file. if you create surface in "Lines" or "Surface & Compartment" it be better.

[pablitoo81]

Hi AYM910
I am only recently trying to learn Tribon but without any training or user guide it is most impossible.Can you help me?..I will be grateful for any help.
Best Regards

[AYM910]

Hi pablitoo81
If you have any questions about "Tribon" please ask me. Don't feel shy.
Give me your email and i will send you tutorial for Tribon

[pablitoo81]

Hi AYM910
My email pablitoo24@wp.pl
Thank you very much for help ..If I had some questions of course I will be asking.
Best Regards

[jjchavez]

i interesting in tribon tutorial plss, you can send me to my mail

jj.chavez@hotmail.com

[superdongji]

Originally Posted by AYM910

Before you must create surface in "Surface & Compartment". There is import file (. SAT). I did it from Rhino. But be careful Tribon work badly with imported file. if you create surface in "Lines" or "Surface & Compartment" it be better.

i think black background is good for your eye

[ca10mka]

Hi,
I need to devide the ship design in tribon into small section and find the sectional area of each one, and use it to find the added mass, can any one help with the tibon part.
I have got the basis ship design in tribon

thank you
my email is: harmomo@hotmail.com

[tomazz]

Hello AYM910,
I'm also interesting in tribon and have no tutorial for it. If you can, please send me a copy to tomasuas@gmail.com
thank you
and best regards

[shehabjahaji]

Originally Posted by AYM910

Hi
I used Tribon 10 years, if you have questions please ask me.

hi AYM910

i'm a student and learnig tribon initial design_form recently.but i don't know the actual meaning and use of curves given there.these curves definitions r
given below:

a.half siding curve

b.tangent curve

c.ecentricity curve

d.virtual stern

e.vitual tangent curve

f.phantom stern

plz help me wid ur opinions on these lines and give me a tutorial on tribon M3 initial design_form so dat i can start my project.

thank u
shehab
email: shehab_jahaji@yahoo.com

[mbaghyarajan]

how to trim a surface in surface and compartment module which is projecting out of the hull

[tahtoh25]

Dear Sir,

Am a naval architect from Egypt and its not easy to find any software like tribon here easy could you inform me from where can i download that Trbion Free

Thanks