1. The Marketplace Forums can be useful for members who know one another well from forum discussions and offline communications and wish to post boatbuilding tools, drafting tools, molds and tooling, and other professional equipment for sale or trade. However, caution and good judgement should always be used. Especially when considering any business with anyone not already well known to you and trusted, due diligence must be used to confirm details and identity and be sure the transaction is safe before any money or property changes hands. Always use good judgement and perform due dilligence and follow these guidelines.

Sailing catamaran moulds

Discussion in 'Boat Molds' started by Richard Woods, Feb 17, 2013.

  1. Richard Woods
    Joined: Jun 2006
    Posts: 2,209
    Likes: 175, Points: 63, Legacy Rep: 1244
    Location: Back full time in the UK

    Richard Woods Woods Designs

    Sailing catamaran moulds available

    Due to retirement a boatyard is changing hands and we have to clear out the moulds for a number of successful sailing catamarans by well known designers. Boats range from 26ft - 38ft and are racers and cruisers

    Moulds are currently in a yard in SE Cornwall UK. Some are small enough to be shipped abroad. All can be transported in the UK by road

    Full building rights are available together with drawings and designer/marketing support

    Prices are very negotiable and are low enough to be attractive even if you only plan to build one boat for your own use

    Please email me in the first instance and I will forward your message to the boatyard

    Richard Woods of Woods Designs

    www.sailingcatamarans.com
     
  2. Richard Woods
    Joined: Jun 2006
    Posts: 2,209
    Likes: 175, Points: 63, Legacy Rep: 1244
    Location: Back full time in the UK

    Richard Woods Woods Designs

    So no interest?

    This is your last chance before the moulds are cut up and sent to landfill - at considerable expense

    So make any offer to me and I'll pass it on

    Richard Woods of Woods Designs

    www.sailingcatamarans.com
     
  3. upchurchmr
    Joined: Feb 2011
    Posts: 3,287
    Likes: 259, Points: 83, Legacy Rep: 579
    Location: Ft. Worth, Tx, USA

    upchurchmr Senior Member

    Richard,

    How about a list of the boats that match the molds?
    Perhaps of a little more interest that something un-named.
     
  4. Richard Woods
    Joined: Jun 2006
    Posts: 2,209
    Likes: 175, Points: 63, Legacy Rep: 1244
    Location: Back full time in the UK

    Richard Woods Woods Designs

    here is a partial list

    Elf 26, Savannah 26, Sagitta 30, Eclipse 32, Scorpio 30, all my designs

    Summer Twins 25/28, Twins 31/33, Twins 38 all Pat Patterson designs

    maybe a couple of others

    Richard Woods
     
  5. ehill
    Joined: Aug 2013
    Posts: 0
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: halifax, Canada

    ehill New Member

    did they go to the dump or are they still available?

    Hello,
    I recently came across an opportunity to take over a small production business and was just browsing for some moulds.
    regards,
    Eric
     
  6. Richard Woods
    Joined: Jun 2006
    Posts: 2,209
    Likes: 175, Points: 63, Legacy Rep: 1244
    Location: Back full time in the UK

    Richard Woods Woods Designs

  7. Richard Woods
    Joined: Jun 2006
    Posts: 2,209
    Likes: 175, Points: 63, Legacy Rep: 1244
    Location: Back full time in the UK

    Richard Woods Woods Designs

    So these moulds are still available. Now free to anyone who takes them, subject only to royalty payments to the designers

    Richard Woods of Woods Designs

    www.sailingcatamarans.com
     

  8. Richard Woods
    Joined: Jun 2006
    Posts: 2,209
    Likes: 175, Points: 63, Legacy Rep: 1244
    Location: Back full time in the UK

    Richard Woods Woods Designs

    Bumping this thread again. The moulds are all still available. From beach cats to trimarans up to 50ftapprox catamaran. They will all be destroyed in January. All still free to take away, all are successful designs by well known designers.

    Please contact me at woodsdesigns@gmail.com for more details

    Richard Woods of Woods Designs

    www.sailingcatamarans.com
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.