rent 100-110ft mold for sailing yacht? or someone can build hull from own mold for me

[gp333]

I looking rent 100-110ft mold for sailing yacht
or someone can build hull from own mold like this for me?

any advices and information are welcome

[PAR]

You will need to provide a lot more information, about the sailboat hull form you desire, then just it's length.

[gp333]

hull material coremat and full epoxy built

but I am ready accept existent mold from someone! because that I ask other.. that say me about their existing molds

[PAR]

Again,
"You will need to provide a lot more information, about the sailboat hull form you desire, then just it's length."

I don't think it's too difficult to imagine, there are many different types of sailing yacht hull shapes to pick from, which would you prefer? Without some specific hull form direction, I believe you'll get very few replies.

[sabahcat]

Originally Posted by gp333

hull material coremat and full epoxy built

molds

How will that work on a hull of that size?

[gp333]

Originally Posted by PAR

Again,
"You will need to provide a lot more information, about the sailboat hull form you desire, then just it's length."

I don't think it's too difficult to imagine, there are many different types of sailing yacht hull shapes to pick from, which would you prefer? Without some specific hull form direction, I believe you'll get very few replies.

yes, and me are good all types... main point is that I find that someone have this and that I can obtain low hull price. All types are ok (except fully sport purpose hull)

have someone something like this? any mold for bigger sailing yacht?

[PAR]

I have access to this size bare hulls, what is your budget. These will be moderately burdened cruising yacht hull forms. Everyone desires good pricing, but frankly in this displacement range, there is nothing "low price".

[gp333]

Originally Posted by PAR

I have access to this size bare hulls, what is your budget. These will be moderately burdened cruising yacht hull forms. Everyone desires good pricing, but frankly in this displacement range, there is nothing "low price".

Pls. send link of yacht build with these molds and how much cost build epoxy hull. And location of shipyard.

You say budget.. i will look for few offers and see what is best.. i am not any expert that I define prices here :-)

If it is complicated post here , send me PM

[apex1]

gp333
my I ask what would you do with such a hull?
Building a yacht yourself cannot be what you are planning (your coremat statement showed that). And a homebuild that size needs at least 12 years. (fulltime)
Getting it built cannot be what you´re planning (yards know how to make a hull.
So, for what do you need a 30m sailboat hull?

[gp333]

Originally Posted by apex1

gp333
my I ask what would you do with such a hull?
Building a yacht yourself cannot be what you are planning (your coremat statement showed that). And a homebuild that size needs at least 12 years. (fulltime)
Getting it built cannot be what you´re planning (yards know how to make a hull.
So, for what do you need a 30m sailboat hull?

heh really lot questions for me.. only no answer on my question..

no worry for me... I have team to build yacht. But creating mold for one yacht only is costly! and slow

I simple wish buy from someone who do it in past..

Have people like this here?

[PAR]

heh really lot questions for me.. only no answer on my question..

That's funny, because I've not gotten you to answer any of my questions either. As a result, I can't take your offer seriously. Without an idea of budget and yacht type, I can reasonably entertain any of the leasing arrangements I have on several molds. I don't need hard figures, just an idea what price range and hull type are suitable. This narrows my search considerably. If this minor level of cooperation isn't possible on your part, then business will be all but imposable.

[gonzo]

A one off hull will not cost you much more. The hull is maybe 15% of the total cost, so a small difference is not significant.

[peter radclyffe]

I can build you a hull , what is the design, & where are you

[gp333]

Originally Posted by PAR

That's funny, because I've not gotten you to answer any of my questions either. As a result, I can't take your offer seriously. Without an idea of budget and yacht type, I can reasonably entertain any of the leasing arrangements I have on several molds. I don't need hard figures, just an idea what price range and hull type are suitable. This narrows my search considerably. If this minor level of cooperation isn't possible on your part, then business will be all but imposable.

O man I not ask new mold creation..
I ask people that show me what they work in past!

you ask me (buyer) that I know somehow that you do in past and that I say price to you??

man if you have any thing real, show me your past work and say value of this...
thats all.. if this all van be good chance for me, we can talk more..

[gp333]

Originally Posted by peter radclyffe

I can build you a hull , what is the design, & where are you

I was ask people with existing molds! I not ask new design

are anyone ready what I talk?

show me your OLD finished yacht that size and if you have OLD mold of this yacht we can talk...