Bass and bay boat molds

[jammer]

I have molds from now defunked Viper/Cobra/Venom company up for sale. As is, where is. Will sell one or all in pairs ONLY! (hull and cap)

http://web.archive.org/web/200411301...enomboats.com/

[tja]

Do you have any that are between 17 to 18 ft. with no more then 14 degrees of dead rise. I had posted in the past for the same thing with 12 degrees of dead rise with no one responding so I decided to raze the dead rise. Thanks. Sincerely, Tom.

[jammer]

Hi Tom

I do have a 17 and 18 bass hulls but I'll have to measure the deadrise this weekend. I will post back.

[jammer]

Tom

The deadrise on both is 16 degrees

[zerolat]

Interested in the larger hulls but need some info on dimensions, etc. If you could email me zerolat@bellsouth.net The website listed really doesn't help showing the layouts, etc. Thanks!

[jammer]

I"ll see if I can dig up some piks and email the info. What model(s) are you interested in?

[jammer]

Here is the basic layout of their boats.

[zerolat]

Hard to say what models, not being able to see the profiles, etc. Probably definitely the bay boat. I'd probably toss the deck molds and make new decks. Looking to build something like 22 Pathfinder, Shearwater, etc. If you can drop me an email; I'll discuss in detail about what we are trying to do. Thanks!

[boat junkie]

do you have a 20 ft bass mold deck and hull? how much

[jammer]

Yes, I have 2 styles of 20 footers. One with an oval splash well and one with a rectangular well. Email me for price.

[jcharrie]

Plese sir can you send me some pictures with prices of the boats and molds you have for sale along with the specs, thanks . My email adress is jcharrie @bellsouth.net

[jammer]

Check your email

[jcharrie]

I like the boats! Are there any legal issues with the copyright? I didn't see any information about the draft of the 18 footer. so what would that be? Thanks for your reply sir.

[jammer]

There are no legal issues with these boats. A copyright has never been applied for.

The draft on an 18 and 20 is 10 inches aft , at rest w/motor.

[jcharrie]

I am interested in this mold. But I am new to making boats. I do however make molds for myself for pouring ornamental concrete. So sir could you tell me what it cost to make this boat/ Then I would also like to know what it cost to rig it out, if this is a possibility? I would also like to see some pictures of this mold. thank you for your time. Also sir I would like to no about copyrights. Could you transfer all rights to this boat to me and I can get it copyrighted? thanks for your time sir.