20' and 21' boat molds

[marlo2010]

I misstated, I have the two cuddy cabin molds (hull, deck, maybe stringer molds) one is like 20'8" and the other 21'6". I also have the 21'6" open bow molds. Make me an offer. The center console hull mold , no deck mold (maybe a stringer mold) and then 2 different center console molds.

[marlo2010]

picture of center console hull, this was after I pulled it out of the shed, it is just dusty in the picture. As stated earlier, they aren't perfect, but with a good cleaning and maybe 1/2 days work they would be ready for work.

[WaveWarrior]

marlo,

Please feel free to contact me at: wavewarrior@live.com

Thanks!

[marlo2010]

These molds were moved outside after winter (about 6 months ago). They will not be making their way back inside and I hate to see them ruined. They are in the Midwest, and I will sell them cheap to someone who is interested.
My definition of cheap is like $50 per piece, which is essentially covering my cost to help load them up. Again I would rather see them used than ruined. If you have a way to haul them and can do it in a timely manner, let me know. I will be cutting the steel frames off for scrap and landfilling the molds in the near future if no one is interested.

[fisherman_kk]

I have asked for a reply a couple of times. I'm interested in all the molds you have. I'd like to get some pics of the hulls and parts that come out of these molds. Please contact me at kklamann2@hotmail.com

[WaveWarrior]

Originally Posted by marlo2010

These molds were moved outside after winter (about 6 months ago). They will not be making their way back inside and I hate to see them ruined. They are in the Midwest, I will be cutting the steel frames off for scrap and landfilling the molds in the near future if no one is interested.

Marlo,

Please send me an email with contact info and we work on picking them up.

Thanks,

Jeff
wavewarrior@live.com

[marlo2010]

fisherman-kk
I have tried to respond to your requests and they must not be getting thru. The only hull for a fishing style center console is the 21', and I only have the hull. I have two different center console (helm) molds though. There is a picture on here of it. I do not have any pictures of completed products.

[WaveWarrior]

Marlo,

Can't seem to contact you through this forum on PM, send email to be able to contact you back. Thanks again: wavewarrior@live.com

[m3mm0s rib]

The price is funny There is a problem;

[mkirshy]

do you still have molds please let me know what u have if so

[marlo2010]

I still have the two 21' hulls and decks (one hull no longer has the steel structure), a 20' CC hull mold, and a 20' cuddy cabin hull and deck. There are two stringer molds and two center console molds, don't know if they are for these or not. I have started to scrap and get rid of this stuff (about half of what I had is already gone) so the list is getting smaller. All the molds are in OK condition, all could be repaired and used for production. Any one of the pieces could be used as is to make a new plug today. The 20' center console hull and the two center console molds could be cleaned and waxed an used for production today.

[mkirshy]

do you have pictures and what do you want for them? if you have time give me a call at 843-260-3462 thanks

[marinediesels]

Hi, do you still have any of your molds for sale? please send a list pics and prices to info@marinemanagerscorp.com also location, weight and dimensions if possible so I can calculate shipping cost. Thanks, Justin

[mitchellboats]

Do you still have the center console mold.

[mitchellboats]

I'm looking for 21C/C mold. info@huntingfishingnews.com