12m fuel efficient Power Catamaran Moulds for Sale

[GRP1]

We have for sale a set of Hull moulds for a very Fuel Efficient Power Catamaran , the length of the mould is 12m and the centre section is flanged allowing a beam of up to 5.5m ( length of vessel made can be between 10m and 12m )

The Mould is in excellent condition and has been made with the best quality materials , tooling gel was used and it has a thick layup. The mould is a 3 piece mould and has full steelwork for ease of use. Each section is set up on wheels for ease of movement.

Full data to be provided , cad files , line drawings , layup schedules , powering requirements , hydrographic data , stability info etc , hull design from tank test data , proof of design and mould ownership etc , etc .

This design would be ideally suited for fast passenger transport etc.

With fuel prices as they are at the moment ( and lets face it they wont go down alot !! ) this is the ideal opportunity for someone to further develop this design, the only reason we are not doing this is we are inundated with orders for our existing designs of power cats and just don’t have the time or the room hence why they are for sale at a fraction of their original cost !!

Offers over £20k + vat

Any questions just let me know , can email pics if required

[evento]

is possible to receive more information about your mold

[GRP1]

Hi , if you can forward me your email I will send you some more info.

[Ad Hoc]

define fuel efficient please?

[GRP1]

Hi , fine entry with full aft sections and able to be powered by smaller engines. To give you an idea a fully loaded 10m commercial spec build in working trim @ 9t gives 15knts with a pair of 80hp inboard diesels.

[evento]

hi again... this is my mail evento@net.hr

[Ad Hoc]

Fully loaded....meaning, what is the displacement?
Commerical spec...so built to class and MCA's small craft code?

[Allan V Hunt]

Is this mold set still available for sale?
Can you let me have further details asap.
email: alan@bonhel.com

[bigsplash]

Are these moulds still available. UK based manufacturer interested in acquiring.

[bigsplash123]

U.K. based moulder interested in your moulds.
e-mail:bigsplash123@btinternet.com