Why White ?

Discussion in 'Boat Design' started by WorWilly, Oct 18, 2009.

  1. wardd
    Joined: Apr 2009
    Posts: 897
    Likes: 37, Points: 0, Legacy Rep: 442
    Location: usa

    wardd Senior Member

    you guys are too skeptical, i bet it'll sink all the way to the bottom of the marinas trench
     
  2. Herman
    Joined: Oct 2004
    Posts: 1,618
    Likes: 94, Points: 48, Legacy Rep: 1240
    Location: The Netherlands

    Herman Senior Member

    I once had a black boat (visible carbon). Had to paint it white when I sold it...

    After that had a purple boat, a yellow boat, and a grey boat. Never white...

    For racing boats, I feel that white is too reflective, at least for decks. I tend to use a shade of grey for that.

    About foam cores and dark paint in tropics: make sure you use the high-temp versions of PVC or SAN cores. These usually are good up to 140 degrees C.
     
  3. hoytedow
    Joined: Sep 2009
    Posts: 5,857
    Likes: 400, Points: 93, Legacy Rep: 2489
    Location: Control Group

    hoytedow Carbon Based Life Form

    Wood under dark colors deteriorates more quickly.(In case you are talking about a wooden hull.)
     
  4. RHP
    Joined: Nov 2005
    Posts: 840
    Likes: 87, Points: 28, Legacy Rep: 1183
    Location: Singapore

    RHP Senior Member

    Is that right Hoyte, I've never heard that before?
     
  5. apex1

    apex1 Guest

    Hoyte makes jokes! He meant: wooden boats are slower than yellow ones!
     
  6. Fanie
    Joined: Oct 2007
    Posts: 4,604
    Likes: 177, Points: 63, Legacy Rep: 2484
    Location: Colonial "Sick Africa"

    Fanie Fanie

    I can see that. Since water can penetrate wood more you have a larger wetted area and the wooden boat becomes slower ;)
    I knew there was a reason I liked glass more :D
     
  7. hoytedow
    Joined: Sep 2009
    Posts: 5,857
    Likes: 400, Points: 93, Legacy Rep: 2489
    Location: Control Group

    hoytedow Carbon Based Life Form

    You guys are kidding, right?
     
  8. hoytedow
    Joined: Sep 2009
    Posts: 5,857
    Likes: 400, Points: 93, Legacy Rep: 2489
    Location: Control Group

    hoytedow Carbon Based Life Form

    The heat destroys the paint/wood bond, causing flaking, spalling etc., or so I have heard. Surely you knew that.
     
    Last edited: Oct 19, 2009
  9. apex1

    apex1 Guest

    Hoyte
    in modern boatbuilding, when the paint has contact with anything wooden instead of primer or EP resin I shoot the painter in the backyard.





    with rotten eggs to lengthen the pain..........
     
  10. Fanie
    Joined: Oct 2007
    Posts: 4,604
    Likes: 177, Points: 63, Legacy Rep: 2484
    Location: Colonial "Sick Africa"

    Fanie Fanie

    Exactly. Especially when you're a DIY'er :D


    Does it look like we are 'kidding' :D

    In fact, we are DEAD SERIOUS :p
     
  11. bntii
    Joined: Jun 2006
    Posts: 731
    Likes: 97, Points: 28, Legacy Rep: 1324
    Location: MD

    bntii Senior Member

    Dead serious indeed!

    Hey- I like a bit of color on boats. But like some other things in life: the fair ones look fine, paint or no.
     
  12. nordvindcrew
    Joined: Sep 2006
    Posts: 541
    Likes: 13, Points: 18, Legacy Rep: 231
    Location: Marshfield massachusetts usa

    nordvindcrew Senior Member

    colors

    My latest rowing boat is medium blue with off white decks and rub rails and light tan inside. The blue is distinctive and easy to identify in a race. the tan inside stays reasonably cool and doesn't show the dirt too badly. All in all, it looks a bit "Bahamian" in it's color scheme. bottom line is, I like it
     
  13. daiquiri
    Joined: May 2004
    Posts: 5,371
    Likes: 258, Points: 93, Legacy Rep: 3380
    Location: Italy (Garda Lake) and Croatia (Istria)

    daiquiri Engineering and Design

    Well, that's a proof that even the best ones can have a bad day and go astray, sometimes:
    [​IMG][​IMG]
    [​IMG][​IMG]

    I find the "ladies" above are absolutely gorgeous in their black dresses. ;)
     
  14. mark775

    mark775 Guest

    Stunning boats, to be sure. I'll take the second one - then spend the rest of my days maintaining its surfaces...Of course the gay green bottom paint has to go.
     

  15. david@boatsmith
    Joined: Aug 2008
    Posts: 133
    Likes: 23, Points: 18, Legacy Rep: 75
    Location: Jupiter Fl USA

    david@boatsmith Senior Member

    In a big racing fleet if your boat is anything but white you are more likely to catch the eye/brain of the race committee as the over early boat whether you are or not. In this case standing out is not an advantage. David
    www.boatsmithfl.com
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.