pad design project an constructions

[riveramunizaga]

hi!!!! everybody

this is my project, old hull but very good performance, and i try to do better.

Is a v-Deep 21º dedrise, 16´, and i´m puting a pad for beter lift, and speed.


what do you thing about it, is a good pad or no.

the pad is 8" with 2 fly about 1.5" in 30º.

[gonzo]

With modifications like that, you'll know when you try the boat in the water. It may chine walk or oversteer. Those are the two most common problems when a hull has too much lift aft.

[riveramunizaga]

is ok, but all the faster boat doit that, whithou troble.

but the question is how can control that in this design.


thank you