 |  |
| Boat Design Forums | Boat Design Directory | Boat Design Gallery | Boat Design Book Store | Thanks to Our Site Sponsors |
| ||||
|
#1
02-05-2007, 06:48 PM
| ||||
| ||||
| need info on saftey capsules anyone got the scope for the materials lay up schedules etc apba needs a 4000 newton number i got to build one i was thinking 3/4 24 lb penski board with kevlar and carbon fiber as for the steel cage i dont know if i need that in the outboard classes thanks for your help Last edited by scott steffe : 02-05-2007 at 08:47 PM. Reason: miss spell word  |
|
#2
02-13-2007, 05:18 PM
| |||
| |||
| This is 05 spec for OPC, May have changed so this may be outdated. 3/4 skinmatt, 2x 9-10oz carbon,2x 6-8oz kevlar,15mm or 5/8 core, 2x 9-10oz carbon, 1x 6-8oz kevlar. I would check with APBA. Steel cage is only needed in IHBA drag boats that run quicker than 7.70 ET, but check with the org. you would race with. I would try to find a manufacture that builds outboard capsules. Seebold, Grand prix, Lee boats, They may be able to help you with what you need. Remember your strapping yourself in so take your time to get it right. Hope this helps. |
|
#3
02-13-2007, 05:22 PM
| ||||
| ||||
| yes sir i just got a reply from apba today they are sending me the lay up schedules they basicly said what you said |
 |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| looking for info on this boat... | markI | Boat Design | 0 | 02-02-2007 05:51 AM |
| need info | 32' new guy | Materials | 0 | 08-21-2004 08:37 PM |
| Info | diehard | Fiberglass and Composite Boat Building | 1 | 08-13-2004 04:51 AM |
| looking for info/Ghost | histeel1j | Sailboats | 6 | 09-23-2003 06:02 PM |
| need info | roland | Boatbuilding | 2 | 06-12-2003 02:22 AM |
Linear Mode
