Anyone have copy of 1964/1976 Savitsky papers?

[dennisolcott]

If anyone happens to have the following articles, I would appreciate an email.

"Hydrodynamic Design of Planing Hulls,"
Daniel Savitsky,
Marine Technology, October 1964 Issue, SNAME

"Procedures for Hydrodynamic Evaluation of Planing Hulls in Smooth and Rough Water,"
Daniel Savitsky and P. Ward Brown,
Marine Technology, October 1976 Issue, SNAME

"Small-Craft Power Prediction"
Authors: Blount, Fox
Marine Technology, January 1976, SNAME

"Resistance Prediction of Planing Hulls"
by Bryant S. Almeter
Marine Technology & SNAME News, Vol. 30, N0. 4, October 1993

Thanks!
Dennis

[Ike]

Why don't you try Dan Savitsky? He can be contacted through the Stevens Institue in Hoboken NJ. here's the link http://www.stevens-tech.edu/engineer.../Savitsky.html

[Bito]

I have the 1964 paper and the 1976 Blount-Fox paper. It is a lot of photocopying, so if you find someone else with the papers in PDF, you'd be better off. If you have any questions, or want a few figures, I can scan some stuff fairly easily.

[dennisolcott]

I got a copy of Blount-Fox. How long is the 1964 Savitsky paper? Where are you located? Would it be too much trouble to mail a copy?

I assume you don't have a copy of the 1976 Savitsky paper?

I did email Dr. Savitsky, but haven't heard back.

Thanks for replying to my post!!!

(PS - I tried to send you a private message, but you have that function turned off).

[dennisolcott]

Bito/Ike:

I did contact Dr. Savitsky and he kindly responded to my email. He sent me a copy of the 1964 paper and hopefully I'll get a copy of the 1976 paper.

Thanks for your help!!

Dennis

[Bito]

Savitsky is the best

[dennisolcott]

A friend of mine works at a "major" boat manufacturer...he says the engineers refer to Savitsky as "Noah". Pretty good company if you ask me.

[Reneboat]

Hallo Dennis

I'm a student in Austria and would also need the Savitsky paper
"Hydrodynamic Design of Planing Hulls,"
Daniel Savitsky,
Marine Technology, October 1964 Issue, SNAM

Can you mail me the paper?

Regards Rene

[dennisolcott]

Send me your email address. Mine is dolcottDELETETHISSTUFF@adamaircraft.com.

[Reneboat]

Hallo

Nice to get such fast answer.
My email adress is rene.killer@gmx.at

Do you also have the other 3 papers described from you?


Regards Rene

[kferran]

Hello,
I know I am a bit late in this but did anyone get the 1964/1976 Savitsky papers in pdf format? Specifically, I am looking for:

"Hydrodynamic Design of Planing Hulls" Marine Technology, October 1964 Issue, SNAME

"Procedures for Hydrodynamic Evaluation of Planing Hills in Smooth and Rough Water: Marine Technology, October 1976 Issue, SNAME

"Chapter IV Planning Craft of Modern Ships and Craft" naval Engineers Journal, Feb. 1985, Special Edition, American Society of Naval Engineers, Alexandra, VA.

I tried SNAME without any luck. Thought I would try you all before I bothered Dr. Savitsky. Any help would be greatly appreciated!

Thanks, Karen

[Çemberci]

Pdf files of Savitsky Papers are attached.I have also The others papers
oktay çemberci

[kferran]

Hi Oktay,
You are wonderful! Thank you so much for the pdf files. What a great surprise! Can you post the other papers as well? Karen

[Çemberci]

Mister Savisty - Durdu durdu Sonunda Vurdu.
another savistsy paper is attached.If you send me post address I will send
fotocopies for ..
oktay öemberci

[kferran]

Hi Oktay,
You are so kind! My address is: Karen Ferran, Electro-Mariner Corp, 11568 Sorrento Valley Rd. Ste 13, San Diego, CA, USA 92121. Thank you again for all your help!

Sincerely,
Karen