Composite nails and staples, what gun to use?

[Raggi_Thor]

I want to tray composite nails and staples for my next project.
RAPTOR is available here (Norway) at fair prices.
BUT the airguns recommended from OMER are quite expensive.

What kind of guns do you use?

http://www.raptornails.com/english/firstframe.html
http://www.talkshopbot.com/forum/mes...tml?1130782150
http://www.omer.it/enter.html

I just got a quotation for a composite nails gun model Omer81P 190 USD, I do not think this is expensive. It is pneumatic.

[Raggi_Thor]

Thanks, no thats a fair price, here is what I have found in Norway:

OMER 1755 for nails 1,7 - 1,8 mm kr. 5.997,- = 1000USD
OMER 3012P for diameter 1,1 mm kr. 4.459,- = 750USD?
RAPTOR S05F, for staples 12,7mm kr. 2.921,- = 500USD

(Today 1USD=6NOK)

These prices are a bit old, and they include 25% vat.

I got this price list, but are staple for COLD MOLD, I will have soon quotation for nails for strip planking:
S/05-25, ¼” 19g staple $42.35 box

S/05-37, 3/8” 19g staple $43.95 box

S/05-55, 9/16”, 19g staple $48.85 box

Omer gun 81P tool $190

[Raggi_Thor]

Thanks again :-)
Have you used the staples?
I will use it for three layers of 4mm okume playwood in a radius chine. The plywood will be bent over longitudinal stringers.

Yes, I used progressively in veneer 3,5 mm, first 1/4" (6 mm) staples over the stringer, enough to hold and glued it, then 10mm and 12 mm on others layers. I vacuum last layer.