1986 four winns sole and stringer replacement

[archiechefaps42]

hello everyone I have a 1986 four winn and I have to put floor and stringer in, I need to know what size wood to used 1/2 or 5/8 plywood. I also would like to know what is a good web to order material from need your help my fellow boater.

[FMS]

Match what was there in overall dimension and fiberglass thickness.

It worked for the past 20 years and will work for another 20.

Otherwise, post the size of the boat and engine.

[mctaggert]

I'd go with what FMS says and simply replace what was there. Any good online boatbuilding source will work for epoxy, fiberglass and fasteners. I'd use exterior ply from the lumberyard for stringers, especially if you'll be covering it in glass.