yokebutt
05-30-2005, 02:28 AM
Situation is as follows, we have a russian hydrofoil, 28 feet long and about 1800kg (around 4000lbs) all up weight. Current engine is a six cylinder sidevalve rated about 70hp. With the original set-up, top speed is about 38 knots, so we'd like to bump up the power a little bit. My preference would be an efficient diesel around 120-150hp or so.
Does anyone have any bright ideas on what to use? We do have an old chevy 327 kicking around the shop, and although it would be the cheapest way to re-power, I don't think it would be the most economical in the long run. For no other reason than bone-ass simplicity, I've even considered a volvo B-20 with a weber 36/36 and a suitable cam, but I would really prefer something less agricultural. (the connection between engine and V-drive is an automotive-style drive shaft, so anything goes)
All ideas(well thought out or not) are invited.
Yokebutt.
Does anyone have any bright ideas on what to use? We do have an old chevy 327 kicking around the shop, and although it would be the cheapest way to re-power, I don't think it would be the most economical in the long run. For no other reason than bone-ass simplicity, I've even considered a volvo B-20 with a weber 36/36 and a suitable cam, but I would really prefer something less agricultural. (the connection between engine and V-drive is an automotive-style drive shaft, so anything goes)
All ideas(well thought out or not) are invited.
Yokebutt.