lakerunner
01-04-2005, 12:57 AM
Ok holidays are over and springs around the corner . Half to loose 20 lbs..
and get the lead out. QUESTION..... Hole in the upper topside . approx. 16'' in dia. By the time it is cleaned up .It has a foam core, Can I Fix this with a solid lay-up of frp or should I replace the core.. Is there a size of hole that would determine replacement of the core? Its a pretty good size hole . If smaller I would fix with just a lay-up
But I'm in between with my decision. So I must ask .
THE BOAT.......... 24'' Runabout ski boat- Recreation
THE HOLE.........Approx 16'' Dia. Front upper topside just above waterline about 3'' And about 5' Back from Bow.
Simply not sure................Any advice would be appreciated
and get the lead out. QUESTION..... Hole in the upper topside . approx. 16'' in dia. By the time it is cleaned up .It has a foam core, Can I Fix this with a solid lay-up of frp or should I replace the core.. Is there a size of hole that would determine replacement of the core? Its a pretty good size hole . If smaller I would fix with just a lay-up
But I'm in between with my decision. So I must ask .
THE BOAT.......... 24'' Runabout ski boat- Recreation
THE HOLE.........Approx 16'' Dia. Front upper topside just above waterline about 3'' And about 5' Back from Bow.
Simply not sure................Any advice would be appreciated