Gilmarine
10-08-2004, 06:41 AM
We are located in Portugal, but our mold team of 3 can relocate anywhere to make the mold on site and close to your market. Before we make a mold for our own projects, we analyze the local conditions and use, a feasibility study is made, and we work closely with fishermens associations and the authorities to make a perfect mold for local conditions and market.
We make mold pairs up to 30 ft. based on drawings, your old boat or current types with improvements. Interior and exterior (including deck) makes double skin. We deliver with rotative supports and the molds are all reinforced with stainless steel tubes.
Costs: A 20 ft. mold pair would cost about $ 5,000 in materials for mold and plug, and about 1,500 hours at $ 15 per hour including re-location to your area. We bring all tools, you provide the workshop.
www.geocities.com/gilmarine2003/
We make mold pairs up to 30 ft. based on drawings, your old boat or current types with improvements. Interior and exterior (including deck) makes double skin. We deliver with rotative supports and the molds are all reinforced with stainless steel tubes.
Costs: A 20 ft. mold pair would cost about $ 5,000 in materials for mold and plug, and about 1,500 hours at $ 15 per hour including re-location to your area. We bring all tools, you provide the workshop.
www.geocities.com/gilmarine2003/