strandedturtle
07-02-2004, 12:02 AM
I have a speedboat of 70's extraction with stringers that are dammaged only in one area main center one has 1 inch dammage in limited areas but the next stringer is damaged for a good three feet and has some areas wet and dammaged with in 1 inch of the outer hull and possibly all the way thru in short 6 inch(at the most) area. This boat has been left out and setting before I got it. My questions
Can I work on this with out removing it from the trailer
Can I cut out the area all the way down to 1 inch and place in core replacement and then fiberglass it
Write all this and have everyone understand that I'm new to all this
previous boat have been small metal type
Can I work on this with out removing it from the trailer
Can I cut out the area all the way down to 1 inch and place in core replacement and then fiberglass it
Write all this and have everyone understand that I'm new to all this
previous boat have been small metal type