WickedGood
12-02-2010, 09:37 AM
Here is the Project idea.
I need to build a all purpose small boat to fit on a brand new 18 ft Alum bunk trailer that I have.
Currently Im useing a small 8 x12 ft Galv 2,500 pound utility trailer for hauling manure, firewood, compost, ATV, building material etc. and dont need and can not afford the two trailers.
So the 8 x12 ft Galv 2,500 pound utility trailer in up for sale
and I am thinking of building a small flat bottom or faily flat bottom Plywood work skiff
8 ft wide and 20 ft long.
power will be a 25 HP merc 2 stroke outboard
purpose. Haul Manure, Compost, Firewood, drive ATVs on for transport to islands, haul Deer/Moose. Sea Duck Hunting.
Something all purpose and easy to clean out with a pichfork and presssure washer.
keep in mind that it should be as light as possible and needs to be strong to hold the manure and people standing in it while on the trailer as well as in the water.
I want to be able to get all the material at Home Depot and keep the cost down under $500
Any of you designers want to take a crack at it?
This may be your opportunity to become a Plank Owner of one of the Most Notorious Vessels ever to sail the seven seas.
Just imagine if Magellon, Ciolumbus, Herreshoff or Pogo had the chance to get there name burned into the keel. They would have jummped on it.
Capt Walt
I found a couple of signs that may be relevant to post on the boat
http://www.flagsafe.ufl.edu/snn/images/manure-pit-signs-1.jpg
I need to build a all purpose small boat to fit on a brand new 18 ft Alum bunk trailer that I have.
Currently Im useing a small 8 x12 ft Galv 2,500 pound utility trailer for hauling manure, firewood, compost, ATV, building material etc. and dont need and can not afford the two trailers.
So the 8 x12 ft Galv 2,500 pound utility trailer in up for sale
and I am thinking of building a small flat bottom or faily flat bottom Plywood work skiff
8 ft wide and 20 ft long.
power will be a 25 HP merc 2 stroke outboard
purpose. Haul Manure, Compost, Firewood, drive ATVs on for transport to islands, haul Deer/Moose. Sea Duck Hunting.
Something all purpose and easy to clean out with a pichfork and presssure washer.
keep in mind that it should be as light as possible and needs to be strong to hold the manure and people standing in it while on the trailer as well as in the water.
I want to be able to get all the material at Home Depot and keep the cost down under $500
Any of you designers want to take a crack at it?
This may be your opportunity to become a Plank Owner of one of the Most Notorious Vessels ever to sail the seven seas.
Just imagine if Magellon, Ciolumbus, Herreshoff or Pogo had the chance to get there name burned into the keel. They would have jummped on it.
Capt Walt
I found a couple of signs that may be relevant to post on the boat
http://www.flagsafe.ufl.edu/snn/images/manure-pit-signs-1.jpg