Do You have a RIB Boat mold?

[Erik Asnyg]

I´m very interested in everything that regards RIB boats! Designs, drawings, molds etc. If You are a ship designer who can draw RIB boats for professional use, build to SOLAS regulatives.

[bobber]

I dont have a mold, not that is available from Denmark anyway!, however, i have designed many RIBs. Many using existing boat hull molds, adapted for RIBs. The latest one i actually built, started life as a sport fishing boat, and the mold was adapted to accomodate the inflatable tubes.

Good place to go to find out stuff about RIBs is rib international magazine. www.ribmagazine.com. all sorts of info on RIBs there.
I have designs for RIBs, most ranging from 20foot cruisers to 45foot offshore racing, plus a 49foot racing catamaran RIB. However i am unsure of you need for them. Not something most people will share unless its beneficial

[Kobus Potgieter]

I´m very interested in everything that regards RIB boats! Designs, drawings, molds etc. If You are a ship designer who can draw RIB boats for professional use, build to SOLAS regulatives.

Erik
I'm a rib designer and have access to a lot of different RIB molds.
Send me a mail if you are still keen on RIBs
kobus@ribtrader.co.za