PDA

View Full Version : IMO Fire & Safety Symbols

aharley
11-03-2009, 10:10 AM
Can anyone direct me as to where I can download dwg. Cadd files of the latest IMO Fire and Safety Symbols. Thanks
aharley@rodneyelay.com
daiquiri
11-03-2009, 11:34 AM
There are lots of sites with free jpg or bmp pics of the symbols. You just need to google "IMO fire symbols".
Download a sufficiently detailed one, place it as a background pic in your CAD software and trace over the symbol you need. It takes just few lines and arcs to draw a symbol.
aharley
11-03-2009, 03:54 PM
Yea, I've been doing that, but most of the latest symbols are PDF formate and protected. Most of the jpgs are of the old symbols :(
Ad Hoc
11-03-2009, 08:20 PM
Try these....any 'pdf to dxf' converter will then do the job.
vinceUK
11-04-2009, 05:40 AM
Give me your email, either here or on my personal email address
aharley
11-04-2009, 11:29 AM
Give me your email, either here or on my personal email address

email is again aharley@rodneyelay.com

Thanks
xy2010
03-19-2010, 03:34 AM
like the attched ?
aharley
03-19-2010, 02:59 PM
Yes, That in CAD would be the cat's meow!
xy2010
03-20-2010, 11:52 AM
hi aharley,I only have jpg not dwg ,if you need jpg ,i can send you by mail
aharley
03-20-2010, 04:07 PM
hi aharley,I only have jpg not dwg ,if you need jpg ,i can send you by mail

Thanks xy2010. But I have wrapped up the project in regards to the symbols. All is good. Thanks again. ;)
zeroname
03-23-2010, 06:03 AM
can u share the dwg ?thanks
BayouDude
04-22-2010, 10:57 AM
I haven't had much luck locating cad files so I have been steadily drawing my own as needed. Best way as previously posted is to just reproduce them on your own. Since they don't have to be to any scale just make sure they look close enough and are the right colors. I also suggest making them blocks so you can move them around your arrangement drawings easily. There are some decent .pdf to .dxf converters out there as well that can make life easy.

View Full Version : IMO Fire & Safety Symbols