Looking for old plans

[cbfirewriter]

I'm looking for the plans for a small flat-bottomed boat constructed with 1/4" plywood. The plans were in either Mechanix Illustrated or Home Mechanix in the late 70's, probably 1979. I built three of these boats back then to hunt ducks out of and I'd love to fing the original plans again.

[lewisboats]

http://www.svensons.com/boat/

Good chance they are here.
You could also check with http://dngoodchild.com/front_pg_06_09.htm

[cbfirewriter]

http://www.svensons.com/boat/

Good chance they are here.
You could also check with http://dngoodchild.com/front_pg_06_09.htm

Thanks for the quick response. I scanned the lists and found a design similar to the one I was looking for. I'll be sending for that set of plans. I still wish I had kept that issue of the magazine...must have been misplaced in one my many moves.

Jeff
cbfirewriter@yahoo.com

[lewisboats]

http://blog.modernmechanix.com/magazine/?magname=MechanixIllustrated

Have fun with this then

and maybe you can find it here:
http://www.tias.com/11384/InventoryPage/1813005/1.html

[xj35s]

This is an easy to adapt design... http://pdracer.com/

Here's a LilJon BOAT... http://www.angelfire.com/ego/lewisboatworks/html/desnav_a.htm

Buncha free plans here too.... http://www.woodworkersworkshop.com/resources/index.php?cat=406

[lewisboats]

Ooooooh! Thanks for the Plug!

Steve

[xj35s]

I guess I can't add. I didn't put 2 and 2 together LOL. I'm new here.

I love the Chugger. I can't wait to get started on it. Thank you for the sites and all the help.