View Full Version : rent 100-110ft mold for sailing yacht? or someone can build hull from own mold for me
gp333
10-01-2009, 07:08 PM
I looking rent 100-110ft mold for sailing yacht
or someone can build hull from own mold like this for me?
any advices and information are welcome
You will need to provide a lot more information, about the sailboat hull form you desire, then just it's length.
gp333
10-02-2009, 10:51 AM
hull material coremat and full epoxy built
but I am ready accept existent mold from someone! because that I ask other.. that say me about their existing molds
Again,
"You will need to provide a lot more information, about the sailboat hull form you desire, then just it's length."
I don't think it's too difficult to imagine, there are many different types of sailing yacht hull shapes to pick from, which would you prefer? Without some specific hull form direction, I believe you'll get very few replies.
sabahcat
10-02-2009, 07:16 PM
hull material coremat and full epoxy built
molds
How will that work on a hull of that size?
gp333
10-02-2009, 07:29 PM
Again,
"You will need to provide a lot more information, about the sailboat hull form you desire, then just it's length."
I don't think it's too difficult to imagine, there are many different types of sailing yacht hull shapes to pick from, which would you prefer? Without some specific hull form direction, I believe you'll get very few replies.
yes, and me are good all types... main point is that I find that someone have this and that I can obtain low hull price. All types are ok (except fully sport purpose hull)
have someone something like this? any mold for bigger sailing yacht?
I have access to this size bare hulls, what is your budget. These will be moderately burdened cruising yacht hull forms. Everyone desires good pricing, but frankly in this displacement range, there is nothing "low price".
gp333
10-03-2009, 04:05 AM
I have access to this size bare hulls, what is your budget. These will be moderately burdened cruising yacht hull forms. Everyone desires good pricing, but frankly in this displacement range, there is nothing "low price".
Pls. send link of yacht build with these molds and how much cost build epoxy hull. And location of shipyard.
You say budget.. i will look for few offers and see what is best.. i am not any expert that I define prices here :-)
If it is complicated post here , send me PM
apex1
10-03-2009, 05:41 PM
gp333
my I ask what would you do with such a hull?
Building a yacht yourself cannot be what you are planning (your coremat statement showed that). And a homebuild that size needs at least 12 years. (fulltime)
Getting it built cannot be what you´re planning (yards know how to make a hull.
So, for what do you need a 30m sailboat hull?
gp333
10-03-2009, 05:48 PM
gp333
my I ask what would you do with such a hull?
Building a yacht yourself cannot be what you are planning (your coremat statement showed that). And a homebuild that size needs at least 12 years. (fulltime)
Getting it built cannot be what you΄re planning (yards know how to make a hull.
So, for what do you need a 30m sailboat hull?
heh :D really lot questions for me.. only no answer on my question..
no worry for me... I have team to build yacht. But creating mold for one yacht only is costly! and slow
I simple wish buy from someone who do it in past..
Have people like this here?
heh really lot questions for me.. only no answer on my question..
That's funny, because I've not gotten you to answer any of my questions either. As a result, I can't take your offer seriously. Without an idea of budget and yacht type, I can reasonably entertain any of the leasing arrangements I have on several molds. I don't need hard figures, just an idea what price range and hull type are suitable. This narrows my search considerably. If this minor level of cooperation isn't possible on your part, then business will be all but imposable.
gonzo
10-04-2009, 01:53 AM
A one off hull will not cost you much more. The hull is maybe 15% of the total cost, so a small difference is not significant.
peter radclyffe
10-04-2009, 06:16 AM
I can build you a hull , what is the design, & where are you
gp333
10-04-2009, 06:19 AM
That's funny, because I've not gotten you to answer any of my questions either. As a result, I can't take your offer seriously. Without an idea of budget and yacht type, I can reasonably entertain any of the leasing arrangements I have on several molds. I don't need hard figures, just an idea what price range and hull type are suitable. This narrows my search considerably. If this minor level of cooperation isn't possible on your part, then business will be all but imposable.
O man I not ask new mold creation..
I ask people that show me what they work in past!
you ask me (buyer) that I know somehow that you do in past and that I say price to you??
man if you have any thing real, show me your past work and say value of this...
thats all.. if this all van be good chance for me, we can talk more..
gp333
10-04-2009, 06:20 AM
I can build you a hull , what is the design, & where are you
I was ask people with existing molds! I not ask new design
are anyone ready what I talk?
show me your OLD finished yacht that size and if you have OLD mold of this yacht we can talk...
gp333
10-04-2009, 06:23 AM
A one off hull will not cost you much more. The hull is maybe 15% of the total cost, so a small difference is not significant.
ok, PAR you know my budget now :-): The hull is maybe 15% of the total cost, so a small difference is not significant.
If you was do similar project in past show images and other... this one sentence so stop you :confused:
apex1
10-04-2009, 07:43 AM
you ask me (buyer) that I know somehow that you do in past and that I say price to you??
..
YES AMATEUR! Thats the way it goes. YOU show us your budget and then WE tell you if it is possible and to which extend. But I doubt there is any budget worth talking, just premature dreams of a pretty barefaced novice.
If you would have the money, you would have the offers for a boat already.
But you dream of doing such task yourself with a "team" of other dreamers....right?!?
gonzo
10-04-2009, 09:15 AM
Do you have any preference of where you will pick up your hull? If you need it delivered that will affect the price.
Gp333, judging from your former postings on this forum, it can be reasonably deduced that you are a young would be designer, with rather limited experience, looking to develop your business. For example this last spring you asked the differences between glass/epoxy composite and GRP hulls. You were looking for technical specifications and price points. Again this suggests you are a rank novice or the school you went to, didn't offer much in regard to building materials and techniques. Therefore it would be wise from my point of view, to discount you as a possible client for multi million dollar yachts, even if it's just a bare hull.
sabahcat
10-05-2009, 09:27 AM
Gp333, judging from your former postings on this forum, it can be reasonably deduced that you are a young would be designer, with rather limited experience, looking to develop your business. For example this last spring you asked the differences between glass/epoxy composite and GRP hulls. You were looking for technical specifications and price points. Again this suggests you are a rank novice or the school you went to, didn't offer much in regard to building materials and techniques. Therefore it would be wise from my point of view, to discount you as a possible client for multi million dollar yachts, even if it's just a bare hull.
BOOM Headshot
http://ui28.gamefaqs.com/1307/gfs_86929_2_9.jpg
View Full Version : rent 100-110ft mold for sailing yacht? or someone can build hull from own mold for me