looking for tribon tutorials

[rohinit]

I have started learning tribon, can any one pronide me basic design tutorial kind of thing.
My e-mail is rohinit.raj@rediffmail.com

[zeroname]

hy

as you are from india. i think u can check this link

http://www.aveva.com/region.php?location=27

You can contact with them for purpose of training.
And to learn Tribon.. big job.. must need training. In india AFA i know , there is also some local tribon training centre.

Thanks

[AYM910]

Hi
I used Tribon 10 years, if you have questions please ask me.

[zeroname]

can u tell how i can import maxsurf design file to tribon and then do hydrostatic calculations and surface create?

[AYM910]

Before you must create surface in "Surface & Compartment". There is import file (. SAT). I did it from Rhino. But be careful Tribon work badly with imported file. if you create surface in "Lines" or "Surface & Compartment" it be better.

[pablitoo81]

Hi AYM910
I am only recently trying to learn Tribon but without any training or user guide it is most impossible.Can you help me?..I will be grateful for any help.
Best Regards

[AYM910]

Hi pablitoo81
If you have any questions about "Tribon" please ask me. Don't feel shy.
Give me your email and i will send you tutorial for Tribon

[pablitoo81]

Hi AYM910
My email pablitoo24@wp.pl
Thank you very much for help :)..If I had some questions of course I will be asking.
Best Regards

[jjchavez]

i interesting in tribon tutorial plss, you can send me to my mail

jj.chavez@hotmail.com

[superdongji]

Before you must create surface in "Surface & Compartment". There is import file (. SAT). I did it from Rhino. But be careful Tribon work badly with imported file. if you create surface in "Lines" or "Surface & Compartment" it be better.

i think black background is good for your eye

[ca10mka]

Hi,
I need to devide the ship design in tribon into small section and find the sectional area of each one, and use it to find the added mass, can any one help with the tibon part.
I have got the basis ship design in tribon

thank you
my email is: harmomo@hotmail.com

[tomazz]

Hello AYM910,
I'm also interesting in tribon and have no tutorial for it. If you can, please send me a copy to tomasuas@gmail.com
thank you
and best regards

[shehabjahaji]

Hi
I used Tribon 10 years, if you have questions please ask me.




hi AYM910

i'm a student and learnig tribon initial design_form recently.but i don't know the actual meaning and use of curves given there.these curves definitions r
given below:

a.half siding curve

b.tangent curve

c.ecentricity curve

d.virtual stern

e.vitual tangent curve

f.phantom stern

plz help me wid ur opinions on these lines and give me a tutorial on tribon M3 initial design_form so dat i can start my project.

thank u
shehab
email: shehab_jahaji@yahoo.com

[mbaghyarajan]

how to trim a surface in surface and compartment module which is projecting out of the hull

[tahtoh25]

Dear Sir,

Am a naval architect from Egypt and its not easy to find any software like tribon here easy could you inform me from where can i download that Trbion Free

Thanks

[ferdicakici]

yea,it would be great to use tribon after maxsurf,howover,it will be hard to find a setup for me.

[b1ck0]

Guys,
you know that it's illegal to use such "free" software, right ? :)
I mean that it's not appropriate to discuss this topic here. And this is not the place where you will find "download link" :) No offense ;)

[apostolis22]

Im also a Naval architect student and the tutorials too.. Anyone found any?
Thank you!

[sudhir0201]

DEAR AYM910,
Can u give me Tribon Tutorials. i want to learn tribon......my email id is sudhir.pals@gmail.com.
thanks

[apostolis22]

I still havent found tutorials.. Can please send me to giamalakies2288@hotmail.com ?

[cugior]

Hi. I have imported a .sap surface file in surface/compartment and i have generate the dm file but i can use it in Basic Design. Must I have a closed surface? Must i create an envelope?
Can someone help me? thanks in advance

[vinafk]

how you generate *.dml file?

[cugior]

I haven't generate dml file. Is it necessary?

[KMgreece]

Before you must create surface in "Surface & Compartment". There is import file (. SAT). I did it from Rhino. But be careful Tribon work badly with imported file. if you create surface in "Lines" or "Surface & Compartment" it be better.



Hello! My name is Kostas and I am a naval architecture student from Greece. Is there a place with tutorials on how to properly insert surface from rhino (rhino marine) to tribon. I tried the acis sat file way but although the surface is imported I can't get it working on calc & hydro :(

[zeroname]

generate new lines in surface modules, open it in lines module, then make new surface and save it as DML file. after that u can work with any module with the *.dml file.

[KMgreece]

generate new lines in surface modules, open it in lines module, then make new surface and save it as DML file. after that u can work with any module with the *.dml file.

Hello! Sorry if I ask very simple questions but I am totaly new to tribon usage and still getting around. can you tell me how can I do this or even better where can I find a tutorial so I wouldn't have to ask and bother you with basic stuff.. All day I've been trying to export .bri files from rhino surface via fastship program e.t.c but can't get it to work.

MY BASIC PROBLEM IS THIS : I created a surface in rhino (and rhino marine) and with cage edit I managed to get the exact LCB and Δ that I wanted. Then I insert this surface into tribon (sat acis file) but can't set any compartments!!!

I don't know how to get lines out of the surface and all day I ve been trying to extract sections (and stem profile) but since I HAVE THE SURFACE (and in tribon it even shows it in meshes so it does 'understand' it), there must be a better and above all most accurate way to get again the surface I allready have :( any help will be greatly valued! thank!

[icaka89]

Hello! I want to learn Tribon, can anyone send me a tutorials, thanks in advance :)
My e-mail is: hristo_89_30@abv.bg

[Niru]

Good days sirs,

@ Sir AYM910

im very interested in the tutorials you mention for tribon... can you please send me a copy?

my email add is neil.marinetech@gmail.com

also i have this thing with gap (general arrangement plan) a different approach in presenting such plan. any tips/advise on what 3d software can be used.

many thanks!