Looking for building space in NY/CT/NJ area

[Momo2000]

I am looking for a space to build Dick Newick's Tremolino 23 foot tri - wooden strip planking/epoxy construction. Anything within 1.5 hour drive from NYC would work. Need space about 15x25 feet at a minimum to fit the strong back for the main hull. I have a separate place to keep completed parts/hulls. I already bought the plans from Newick, including the dxf files for the stations.

I can work on it only the weekends, but the strong back will have to remain in place until I finish the hulls. Willing to pay reasonable rent, considering the value of the boat I am building. I intend to start this as soon as I find the space and finish it before the Spring 2010.

Clean, reliable, a multihull fanatic.

Anyone know anything? Anyone wants to build this boat and has space? Let's build two at once - good savings on time and money for the frames, strong back setup, tools and volume purchase of materials. I will also have help from a very experienced high-tech boat builder pro.

Thanks,
Serge

[wjquigs]

Serge,
I built parts of my Farrier tri at Moishe's Moving and Storage warehouse in Jersey City. It's about 15 mins walk from the Journal Square PATH. I rented a 400 s.f. indoor storage unit and they added power for my tools. They have an odd-shaped corner of their lot where you could probably put up a temporary shelter to build the hulls, and keep your tools and supplies in the warehouse.
Bill

[fhrussell]

Hi Serge,
I may have some space for you if you are still looking. I am about 1.25 hours from Manhattan by car.
Frank

[Momo2000]

ah yes, I do recognize the boat.

I'll send you an email.

Thanks, gents.

http://lh6.ggpht.com/_Bz1uWFjkthM/SGrztk_Jb4I/AAAAAAAAAXg/R7abiEdHdiw/s640/IMGP0660.JPG