Teach me about gel coat!

[craigman]

Hello!
I'm new to the forums and even newer to boats.
I'm in the process of rebuilding my 1974 Reinell trihull. Replacing wood in floor and transom. And then i'm going to repaint it. I'm a automotive painter by trade but i no nothing about boat finishes and gelcoat.
How are most people refinishing their boats? Are they using automotive paint or gelcoat? And how is gelcoat applied? Brushed? Sprayed?

If anyone can tell me or point me to a website that would be greatly appreciated!

Thanks for your time,
Craig

[Steve W]

Gelcoat is for applying into the female mold when building new product,for refinishing old faded gelcoat the acrylic urethane car paints that you are familiar with are the ticket, typically people are using paints with brand names like Awlgrip, Sterling, International paints etc but they are not better than the Dupont, PPG and others you are used to, we painted my sons 24ft sailboat last summer using Nason Fullthane and it compares very favorably with the Awlcraft jobs we have done lately.
Steve.

[craigman]

Thanks steve!
I wasn't sure about the gelcoat thing.
Once i get the transom and floor done it should be a piece of cake!
Thanks again!
Craig

[gonzo]

You can thin gelcoat with duratec clear additive. It will spray like an enamel with a regular gun. I use it often.

[jaredmatteis]

...for refinishing old faded gelcoat the acrylic urethane car paints that you are familiar with are the ticket, typically people are using paints with brand names like Awlgrip, Sterling, International paints etc but they are not better than the Dupont, PPG and others ...

Is this stuff kind of like a clear coat? Iv just finished painting my boat with aeosal spray paint, and Im thinking I need to put some sort of protecting coat over it.

[SamSam]

We always finished floor and transom replacements with an off white gelcoat with 5% of wax added to let it cure tack free. We rolled it on to give it a bit of non skid texture. The texture and some splatter paint or web gel also hid any imperfections like glass laps and such. Very easy, very quick, very durable.

It can be any color, but you don't want it so bright it blinds you or so dark the sun heats it up and makes it uncomfortable. You can also add sand or commercial texture for non-skid, but it takes very little and too much traps dirt and never gets cleans. We never added any non-skid on the inside floors/decks as the roller left enough texture.

[Dan H]

You can thin gelcoat with duratec clear additive. It will spray like an enamel with a regular gun.

I'm finding that is an awfully broad statement.
I'm having a tough time with my dark blue, as you know.
What is a regular gun?
Using Duratec with white is a no brainer, but the dark blue is killing me.

I did however, sand the transom and when I re-sprayed it, the coverage was excellent. So I wonder if sanding helped hide the previous color?

[gonzo]

I mean a regular spray gun for enamel.