best adhesive for engine room insulation

[pasty63]

I will be puttingthe foil backed foam sound insulation on my engine room bulkhead soon. I planned on using 3M weatherstrip adhesive - is there a better product for gluing this stuff on?

hanks -.b

[KnottyBuoyz]

3M Super 77 works fine.

[mydauphin]

Would something a little less flammable be better???

[apex1]

If you would have a choice, you would choose "Armaflex" I´m shure,
and that is selfadhesive.

Regards
Richard

[gonzo]

Go to the local home building supply and buy the trowellable adhesive for outdoor carpet. Put in on with a nothced trowel.

[Jimbo1490]

This stuff from Liquid Nails (http://www.liquidnails.com/products/product.jsp?productId=36) works well for that and you can get it anywhere.

Jimbo

[mark775]

The others, I am not so sure of but JImbo is spot-on from my experience. Stick it up there with some plywood applying even pressure, come back and do the next section after lunch, tape seams, enjoy a neat, clean job with no wrinkles. Screwing, or using the provided clips will be more work and not look as good with time because cleaners, oils (especially) , and sea water find a way under the tape at every wrinkle created.

[pasty63]

Thanks everybody.