jelfiser
10-24-2008, 02:29 AM
Hi to all,
My univeristy is going to build up a 4.6 meters boat for a competition and i've to define geometry of the hull.
the rule are the basically the following
crew 2
max lenght 4.6m
max beam 2.1m
max depth 1.10m
min weight of hull without acessories 80 kg
bowspirit 1.5 m
height mast 7.2m (only one spreader)
max sail area upwind 16 sq mt
total sailarea 33 sq mt
the extimated wind will be no more than 18 kn and wawe no more than one meter
I've done some preliminary sketces i'm going to post , i would like to know your opinion and advices
also i would ask wich kind of sofware may I use for analysis on that kind of boat ( michelet ? cfd? )
That will be the firsth boat built on my design .... so I' m really worried it has to go welll
My univeristy is going to build up a 4.6 meters boat for a competition and i've to define geometry of the hull.
the rule are the basically the following
crew 2
max lenght 4.6m
max beam 2.1m
max depth 1.10m
min weight of hull without acessories 80 kg
bowspirit 1.5 m
height mast 7.2m (only one spreader)
max sail area upwind 16 sq mt
total sailarea 33 sq mt
the extimated wind will be no more than 18 kn and wawe no more than one meter
I've done some preliminary sketces i'm going to post , i would like to know your opinion and advices
also i would ask wich kind of sofware may I use for analysis on that kind of boat ( michelet ? cfd? )
That will be the firsth boat built on my design .... so I' m really worried it has to go welll