Simon Watts "Petaluma"

[sailing canoe]

Does any one have a copy of Simon Watts "Petaluma"? This is my home town boat and hangs in the ceiling of a local brew pub. all I have been able to find is a sheet of construction drawings. I suspect the offets were in the "how to biuld" book that was part of the package. Any Ideas - cheers Nick

[ancient kayaker]

I found this

http://www.woodenboat.com/forum//showthread.php?t=12070

Don't know if it's any help tho

[simonawatts]

Does any one have a copy of Simon Watts "Petaluma"? This is my home town boat and hangs in the ceiling of a local brew pub. all I have been able to find is a sheet of construction drawings. I suspect the offets were in the "how to biuld" book that was part of the package. Any Ideas - cheers Nick

Yes, I have a copy of the building manual.
Simon Watts

[mwatts]

Simon, you didn't by any chance have a relative named Ronald Watts in the Notingham / Sheffield area did you? ;)

[simonawatts]

Not that I know of.

[simonawatts]

Not that I know of.
S. Watts

[sailing canoe]

Hello Simon; I found out later that we were both at the Petaluma TSCA River Row. Good News that you have the Manual. Is there a way to get a copy? I even got in touch with the SF Maritime Museum and they did not have it any more - or couldn't find it. I look forward to hearing from you, Nicholas

[simonawatts]

My only copy is in a spiral-bound folder with photos pasted in. I can take it apart and run off a few copies--yours is not the only inquiry I've had over the years. Do you have the plans? I think there were three sheets total.
Simon W.

[sailing canoe]

I only have one sheet of plans - the construction sheet I would guess. It sounds like a bit of work to take the spiral binding apart. I wish I had bought it years ago when I first saw it in the SF Maritime Book store. Are the off-sets in the manual or on the missing two sheets of plans. How would we proceed from here - Thanks - Nicholas

[simonawatts]

Petaluma has three sheets of plans. The first is General Arrangement, the second full-size patterns for molds and other vital parts and the third oars. You don't need (3) but (2) is essential. There is a table of offsets but you don't need to loft this boat because the mold patterns are full size. I've had a number of inquiries over the years and I'm going to put together a package of the manual with the color photos together with the first two sheets of plans. The Building Manual will be loose leaf, in a folder--you can have it bound if you so wish. The cost will be $50.00 plus $5.00 for postage making a total of $55.00 USD. Before embarking on a project of this magnitude I suggest you look into obtaining the outriggers and sliding seat. We used to get them from Pocock but that was long ago.
My address is 24 Julius Street, San Francisco, CA 94133.
Simon W.

[sailing canoe]

This is great! I will send you a check and look forward to the 'Package" - Nicholas

[simonawatts]

No, don't send me a check until I find out if the plan sheets are available. I believe all the original drawings are in Ashland, Oregon, and will ring them over the weekend.
Simon W.

[simonawatts]

I have sheets One and Two of the Petaluma plans ready to go. Let me have a postal address,
Simon W.

[sailing canoe]

Great news tell me how much I need to write the check for and I will send it and my address, to your address - Nick

[sailing canoe]

Oh sorry , I looked back and saw the cost so I'm sending a check for $55 to you - Nick

[mike1]

Hi Simon, I have been trying to contact yoy, I would also like a copy if possible,, I live in Cape Town , Soith Africa,, I can get a Dollar bank draught, and I guess that the postage will be somewhat more.. If you could let me know I'll need tog get the draught , post it to yoy ,,
regards,
Mike

[simonawatts]

I can run prints of the plans drawings off the original tracings. However, I have not been able to get my hands on a copy of the building manual. The only one I know of is in the libary at Middle Island, Nova Scotia. I will be there mid-May but the island is inaccessible in the winter because of ice.How do you want to proceed? Please reply directly to me at <simonawatts@earthlink.net>
Simon W.