Lap Strake Nuts, CC Skiffs

[Captn_Pea]

Hey All,

Anyone out there have a clue where I can get replacement silicon
bronz nuts that go on the inside of a CC Sea Skiff.

These are the nuts that are square in shape and lock into the inner lap with machine screws comming in from the outside, thread looks like a 10-32 or maybe a 1/4 - 24.

Captn Pea
:confused:

[Dave Fleming]

A little birdy told me you self answered over in the WB forums, no?:rolleyes:

[Oyster]

You say they are square in shape? Jamestown Distributors sells Silicon Bronze hardware.
http://www.jamestowndistributors.com/cgi-local/SoftCart.exe/index.htm?E+scstore+Ovjd

Click on Fasteners, and then click on hex nuts, and then it will ask you for the type, and then click on silicon bronze.

This link should come up:
http://www.jamestowndistributors.com/cgi-local/SoftCart.exe/store/entries/index_fasteners.html?L+scstore+sxgy8423Ovjdffb941b9+1068848662

One quick question, if the nuts are bad, then it maybe that the machine screws are also bad.?

[Captn_Pea]

Originally posted by Dave Fleming
A little birdy told me you self answered over in the WB forums, no?:rolleyes:

Yup I did...

and yes I can be a multi-poster... :eek:

here's the place for your fastener needs, great selection...

http://www.ccfasteners.com/index.html

[gonzo]

I have fixed those boats with hex nuts. You need a helper on the inside. If you can find a supplier for the original style, I'll like to know.

[Captn_Pea]

Yo Gonzo....

I found them at CCFasteners....

There called PM Nuts.

see:
http://www.ccfasteners.com/cgi-local/browse.pl?type=topic&id=60&cart_id=74881a4a3d8ee802902b7841ad4f9d92