Apache Molds are NOT available [Archive]

Guest

06-22-2003, 01:53 PM

The molds that searace has are the 21' Apache Molds you Bob sold Dick Genth the rights to... The 41's are the original 41' design which is what a real apache is. Not that crap you are billing as an apache

War Whoop

06-23-2003, 07:47 PM

What 41 are you refering too "Guest" oh WAIT I know the Popped Bootleg Cigar Mold?? What a POS BTW that is not an Apache .....

Apaches Come from Bob Saccenti Period anything else is a Fraud.:mad: :mad: :mad: :mad:

gonzo

06-24-2003, 04:24 PM

Who is guest? I see too often that these unnamed posts make outrageous claims. There are many people in the industry ripping off the hard work of others. Hey guest: can you back your claims?

buckknekkid

07-14-2003, 04:21 PM

The wrinkled up old Cigar molds will make you seasick looking at them

Guest

07-26-2003, 07:30 PM

According to Andrew Corn the Apache 41 is an extended 39 Cigarette.

The original Cigarette/Apache hull design does not have a patent.

Technically Bobby S. is splashing. The new Apache made by Bobby S. may be a good boat, but it is a SPLASH. (I'm referring to the hull without steps.)

War Whoop

07-26-2003, 09:38 PM

Then the question becomes who in fact did build all the famous Apaches like Little Caesars INXS and the rest...

Mark McManus or Bob S?

Doug Carlson

07-27-2003, 03:44 PM

What do the terms "splashing" and "SPLASH" mean?

War Whoop

07-27-2003, 03:59 PM

That would be the standard route for a dirtbag to make a mold off someone elses hard work IE like taking a popular boat and pulling a mold from it..

There are a lot of People calling themselves boatbuilders after doing that very thing they are not they are sone kind of low class boat molder is all..:mad:

Doug Carlson

07-27-2003, 04:51 PM

Apache 47?

War Whoop

07-27-2003, 05:24 PM

That most likely is an original from the Hollywood Apache shop That Mark McManus was President of..

Guest

08-07-2003, 12:34 AM

A 41' Apache mold is for sale at
http://www.boatmoldtrader.com/apache_41.htm
for $35,000

This is NOT the "Cigar" mold is it?

Guest

08-11-2003, 08:51 PM

lets see>>>>>>>>>someone takes a picture from a hard working racer and boat dealer, a set of drawings from another and says they are apache. BULLFEATHERS, if you cant run on your own merits do not take the Fame of others and use it to cover your own shortcomings

Playn

08-27-2003, 03:24 PM

Originally posted by Doug Carlson
What do the terms "splashing" and "SPLASH" mean?

Like "poping". The use of an existing hull as your plug which you then laid up, poped off and used as your mold.

Guest

09-07-2003, 08:37 PM

Originally posted by Guest
A 41' Apache mold is for sale at
http://www.boatmoldtrader.com/apache_41.htm
for $35,000

This is NOT the "Cigar" mold is it?

theres lots of splashes around

Magictimes

09-16-2003, 06:29 PM

Intellectual Property is exactly that!!! Good Luck.

stinger312

10-16-2003, 01:20 PM

Who has the molds that warpath came from?????

JKK

11-05-2003, 01:22 AM

How can I get additional info on the 41 mold advertised on the site referenced in this thread.

Guest

11-05-2003, 02:40 PM

That mold has recently been purchased by myself. What information can I help you with.

Guest

11-05-2003, 02:56 PM

I was interested in the purchase of the molds myself, but had no luck getting information about who to contact, to facilitate a deal.

JK

Guest

11-05-2003, 06:20 PM

Are you interested in purchasing some hulls and decks out of the molds? If so call me (770)231-6153 Beau

JKK

11-09-2003, 01:00 AM

Maybe, send me the pricing information

cjmotorsportsllc@aol.com

JK

raceday

03-07-2004, 09:35 PM

Yes those are the cigar molds that were pulled off of a 41' Apache. I have seen those molds personally. They are indeed a 41' apache. The tooling gel is very thin and the molds themselves are very thin, if you want to lay up parts in them make sure you level out the whole mold from bow to stern or you may pull out a part that is twisted. Just a heads up. A twisted hull will lay over on you.

John