Small speed boat

[Alex]

Does anyone knows if plans for a small speedboat (10 foot or so) exist. Ideally with a 9.9 or 20hp engine. If anyone knows from where a fiberglass mould or plans for its construction can be bought please e-mail me.


Thanks
Alex

[Jeff]

Sure - you will find lots of plans for powerboats in this range. For example from Glen-L (http://glen-l.com/) and Clark Craft (http://www.clarkcraft.com/):

Monohull: Glen-L Tuffy 13' outboard runabout (http://glen-l.com/designs/outboard/tuffy.html)
Glen-L A or B Class racing runabout (http://glen-l.com/designs/outboard/classab.html)
Glen-L Bingo 12' runabout (http://glen-l.com/designs/outboard/bingo.html)
Glen-L TNT 11' plywood runabout (http://glen-l.com/designs/outboard/tnt.html)
Glen-L Squirt 10' runabout (http://glen-l.com/designs/outboard/squirt.html)
Clark Craft wood OK II 9 (http://www.clarkcraft.com/cgi-local/shop.pl?type=item&categ=018&item=940698595)
Clark Craft wood OK 9 (http://www.clarkcraft.com/cgi-local/shop.pl?type=item&categ=018&item=940697792)
Picklefork / Multi: Glen-L 9 1/2' Picklefork hydroplane (http://glen-l.com/designs/outboard/picklefork.html)
Clark Craft 9' Wood Tunnel Racer (http://www.clarkcraft.com/cgi-local/shop.pl?type=item&categ=021&item=940685699)
Hydroplane: Glen-L Super Spartan 10' hydroplane (http://glen-l.com/designs/outboard/superspartan.html)
Clark Craft Jupiter 10' Outboard Hydroplane (http://www.clarkcraft.com/cgi-local/shop.pl?type=item&categ=012&item=933714047)
Clark Craft Cougar 10' Outboard Hydroplane (http://www.clarkcraft.com/cgi-local/shop.pl?type=item&categ=012&item=933713480)
For 13' speedboat molds for sale, see:
http://boatdesign.net/forums/showthread.php?s=&threadid=30
I also like the Clark Craft Jeckle 9 (http://www.clarkcraft.com/cgi-local/shop.pl?type=item&categ=018&item=940696503) but this is an inboard design.

[Peter Mohr]

Does anyone knows if plans for a small speedboat (10 foot or so) exist. Ideally with a 9.9 or 20hp engine. If anyone knows from where a fiberglass mould or plans for its construction can be bought please e-mail me.


Thanks
Alex

To Alex I have a mold for a small speed boat that you can fitt a inboard or out board, 10Hp and up.
It is a 10 foot 2400mm X 1200. twin hull. Will send Photos if you have interest.

Kind regards
Peter Mohr

[Wellydeckhand]

Mr. Peter,

Where are u in Indonesia, we need technical advise to set up our fiberglass division, u can PM me or email: wellydeckhand@yahoo.co.id .

We definately need a few mold and plug.


Wellydeckhand

[America187]

Try www.Muskokaseaflea.ca look for the "Mini Most XL" in the boat plans section. It's a cool boat, performs well and is easy & cheap to build. Follow the directions on building the Mini Most and apply them to the XL. You do have to register to post on the forums, though. Try www.svensons.com/boat/ as well :)

[lordbater]

Does anyone knows if plans for a small speedboat (10 foot or so) exist. Ideally with a 9.9 or 20hp engine. If anyone knows from where a fiberglass mould or plans for its construction can be bought please e-mail me.


Thanks
Alex
Have you considered splashing a mold from some older boats?
Look at my gallery here.
www.minijetboat.com

[craig mclean]

I have the molds for a 10' picklefork. I don't have any idea what the name of the boat was. the molds have transfered hands several times. I can track them back to a man named Del Ramsdell. Who won many races on the rogue river here in Oregon. My plans are to redesign the boat and begin producing them. I'll try to get some pictures taken. I've been told that with a 30 horse you could do 70 mph. some have tried to put bigger moters on but begin losing stability, w/50 horse.