sharifi
12-02-2006, 07:05 AM
Hi All
I am a naval architect from Iran.
i would like to find a job in Middle east Specially in UAE
in bellow you can find my CV
Best regards
M. Sharifi
Tel:+98 7633417-2118
Email: mhdsharifi@yahoo.com
Po Box: 79145-3736 ,bandar abbas, iran
----------------------------------------------------
Personal information:
Name: MOHAMMAD SHARIFI
Date of Birth: October1978
Habitat: Bandar Abbas\ IRAN
Education:
Naval Architect from Tehran Polytechnic University (AMIR KABIR University) (1998-2002)
Experiences:
08-2002 up to 06-2003:
Structure dept., design & engineering office, ISOICO Shipyard:
In this period I worked for preparing shop drawing for structure and hull outfitting dwg.
Projects:
1- Lunching barge 10000 tons
2- Tanker Barge 5000 tons
3- Deck Cargo Barge 5000 tons
06-2003 up to now:
Head of machinery Group, design & engineering office, ISOICO Shipyard:
In this position I am prepare machinery installation (procedures and shop dwg) and also design machinery foundations, checking related P&ID & maker dwg, and … with my team.
Projects:
1- 1200 ton Landing Craft Project:
2- 5000 tons Tanker Barge:
3- 2200 TEU Container Carrier Project:
4- 35000 tons Product Carrier Project:
Part time Works:
Amvage Boragh Company (from 2001 up to now):
1- Treemaran (wave pursier) boat: Hull basic design & making model
2- Fiber glass Trawler 400 ton: Hull basic Design& Stability Booklet.
3- Passenger Catamaran 70 Persons: Hull Basic Design & Stability Booklet
Arvandan Company (10-2004 up to 02-2005):
1- Initial design and making Spec. for a 12.5m catamaran Hydrograph.
2- Initial design, making Spec. and design P&ID diagram for a 12.5m Multicat boat.
Abilities in computer:
• AutoCAD 2006
• Mechanical desktop 6
• Tribon (Outfitting Modules)
• Maxsurf
• Hull form
• Rhino ceros (a beginner)
• Microsoft Office (Word, Excel, Power Point Microsoft Project, Access) & …
Training Courses:
• Marine Diesel Engines in ISOICO Shipyard
• Auxiliary Machinery (for 2 Month) in Emden- Germany
• Tribon Software-Outfitting Modules (for 1 Month) in New Castle- UK
• KAIZEN term in ISOICO Shipyard
Skills and Abilities
• I am a naval architect but my experience is in machinery group, therefore I can work in both fields (naval architect and mechanical engineer)
• Completely Familiar with Machinery in Engine Room & Machinery Sys. In Merchant Ships
• Completely Familiar Wit DIN, IACS, BV, GL and NKK Standards.
I am a naval architect from Iran.
i would like to find a job in Middle east Specially in UAE
in bellow you can find my CV
Best regards
M. Sharifi
Tel:+98 7633417-2118
Email: mhdsharifi@yahoo.com
Po Box: 79145-3736 ,bandar abbas, iran
----------------------------------------------------
Personal information:
Name: MOHAMMAD SHARIFI
Date of Birth: October1978
Habitat: Bandar Abbas\ IRAN
Education:
Naval Architect from Tehran Polytechnic University (AMIR KABIR University) (1998-2002)
Experiences:
08-2002 up to 06-2003:
Structure dept., design & engineering office, ISOICO Shipyard:
In this period I worked for preparing shop drawing for structure and hull outfitting dwg.
Projects:
1- Lunching barge 10000 tons
2- Tanker Barge 5000 tons
3- Deck Cargo Barge 5000 tons
06-2003 up to now:
Head of machinery Group, design & engineering office, ISOICO Shipyard:
In this position I am prepare machinery installation (procedures and shop dwg) and also design machinery foundations, checking related P&ID & maker dwg, and … with my team.
Projects:
1- 1200 ton Landing Craft Project:
2- 5000 tons Tanker Barge:
3- 2200 TEU Container Carrier Project:
4- 35000 tons Product Carrier Project:
Part time Works:
Amvage Boragh Company (from 2001 up to now):
1- Treemaran (wave pursier) boat: Hull basic design & making model
2- Fiber glass Trawler 400 ton: Hull basic Design& Stability Booklet.
3- Passenger Catamaran 70 Persons: Hull Basic Design & Stability Booklet
Arvandan Company (10-2004 up to 02-2005):
1- Initial design and making Spec. for a 12.5m catamaran Hydrograph.
2- Initial design, making Spec. and design P&ID diagram for a 12.5m Multicat boat.
Abilities in computer:
• AutoCAD 2006
• Mechanical desktop 6
• Tribon (Outfitting Modules)
• Maxsurf
• Hull form
• Rhino ceros (a beginner)
• Microsoft Office (Word, Excel, Power Point Microsoft Project, Access) & …
Training Courses:
• Marine Diesel Engines in ISOICO Shipyard
• Auxiliary Machinery (for 2 Month) in Emden- Germany
• Tribon Software-Outfitting Modules (for 1 Month) in New Castle- UK
• KAIZEN term in ISOICO Shipyard
Skills and Abilities
• I am a naval architect but my experience is in machinery group, therefore I can work in both fields (naval architect and mechanical engineer)
• Completely Familiar with Machinery in Engine Room & Machinery Sys. In Merchant Ships
• Completely Familiar Wit DIN, IACS, BV, GL and NKK Standards.