View Full Version : Identify old bronze winches?


cookeal
11-30-2006, 05:08 AM
Hi,
I am wondering if anyone can help in identifying this winch - It has been taken from a Guy Thompson T24 and I am looking for spares...

Many thanks

Robert Gainer
11-30-2006, 06:01 AM
If there is no makers mark on it then it might be South Coast. If it has a trident trademark on the top then it’s Merriman Brothers or its decedents. But it’s hard to tell from a picture like that. Does it have any marks at all?
Robert Gainer

cookeal
11-30-2006, 06:17 AM
Hi Robert,

No Trident mark. The only markings on the winch are an arrow on the top screw, "-3/06" is stamped into the base of the topscrew and "3/01" stamped into the base plate of the winch.

Thanks

Alex

cookeal
11-30-2006, 06:47 AM
Heres a couple more pics...

Robert Gainer
11-30-2006, 08:11 AM
No Alex, it’s not South Coast or Merriman Brothers. Merriman always had the trademark and South Coast had a top with squared sides instead of the tapered sides of the top shown in the picture.
Sorry,
Robert Gainer

fhrussell
12-23-2006, 08:13 AM
They may not be Merriman's (without the Trident) but they are exact copies. They look identical to my #3's which might be part of the part number you listed above.

"-3/06" is stamped into the base of the topscrew and "3/01" stamped into the base plate of the winch.

cookeal
12-23-2006, 08:44 AM
Thanks for the help - Ill work along those lines. Have you had to source any spares, if so where?
Thanks
Alex

Thunderbird#10
02-07-2007, 03:49 PM
http://www.rigrite.com/Hardware/Winches/Merriman_Winches.html

View Full Version : Identify old bronze winches?