flywheel issue

Discussion in 'Outboards' started by katzcats, Oct 24, 2006.

  1. katzcats
    Joined: Oct 2006
    Posts: 3
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: lake hopatcong

    katzcats New Member

    i turned the key on my 2003 mercury 40h 2 stroke outboard and absolutely nothing happened. the motor had been running excellent. someone took the cover off and pounded on the flywheel without looking at anything else. pieces of magnets began crumbling and he pulled a piece out. can anyone tell this DAMSELL IN DISTRESS what may have happened here?
     
  2. bilgeboy
    Joined: Dec 2005
    Posts: 157
    Likes: 7, Points: 0, Legacy Rep: 45
    Location: Boston

    bilgeboy Senior Member

    Loaded question.

    Those magnets help generate spark as the flywheel spins, and the spark then ignites the fuel. You are definately going to have to pull the flywheel and replace the damage.

    Thats doesn't explain the failure to crank in the first place, unless a deteriorated magnet fell and locked up the flywheel.

    It also sounds like you need a different mechanic to check it out!

    Mike
     
  3. katzcats
    Joined: Oct 2006
    Posts: 3
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: lake hopatcong

    katzcats New Member

    Thank you, so much for responding.. yeah, the boat was running great..started on a dime. lots of power and get-up-N-go...when i turned the key and absolutely nothing happened shortly after the previous ride, i kind of thought maybe the control panel/throttle was not registering in the neutral position. he came over and began pounding and i am pretty upset....hildy
     
  4. katzcats
    Joined: Oct 2006
    Posts: 3
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: lake hopatcong

    katzcats New Member

    should anyone ever pound on a boat flywheel or any flywheel, for that matter?
     
  5. naturewaterboy
    Joined: Sep 2006
    Posts: 211
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: key largo, florida, usa

    naturewaterboy Steel Drum Tuner

    Not with anything but a rubber hammer, I'd say. :)
     
  6. messabout
    Joined: Jan 2006
    Posts: 3,490
    Likes: 606, Points: 113, Legacy Rep: 1279
    Location: Lakeland Fl USA

    messabout Senior Member

    Katzcats;
    Distance yourself immediately from the ******* who pounds on flywheels. The dude is either incompetant or deranged.
     
  7. Frosty

    Frosty Previous Member

    Incompetant and deranged mechanics are not good for any particular part of engines.

    A flywheel should never ever be hit, hitting a magnet or shocking it will reduce its magnetism and therfore its performance.

    The flywheel should now be removed by by a special tool called 'flywheel puller'. If magnets have become detached from the flywheel as it was running I have to warn you that it is likely that serious damage may have occured.
     
  8. gonzo
    Joined: Aug 2002
    Posts: 18,369
    Likes: 2,412, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    There is a label on the flywheel: "DO NOT STRIKE". If some bonehead does the magnets crack. It can be repaired. Remove the flywheel (with the appropiate puller) and get a repair kit. The timing has to be reset after.
     
  9. ZukiJon
    Joined: Dec 2006
    Posts: 5
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: NC

    ZukiJon Junior Member

    Sounds like someone ought to pay the repair bill for you....but yeah, don't let that guy mess with it anymore
     
  10. RAWRF
    Joined: Dec 2006
    Posts: 72
    Likes: 1, Points: 0, Legacy Rep: 14
    Location: Eagle, Alaska

    RAWRF Junior Member

    I can tell you right away what went wrong with your engine before the dunce hit it with a hammer...it's a Mercury. I had two of them and I will never make that mistake again.
     

  • Loading...
    Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
    When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.