surface propeller

[plattgatter]

Hello, can somewon help me to find a used propeller 24-25" for surfacedrive??

[chan]

Hi.
Im afraid I dont have a 24-25" prop, but I have a 24x26" if that could do.
I know someone who has a 23-25" and a 24-24".
/Chan

[plattgatter]

Hello, thank you for the mail, it was interesting.
Can you give me a price on the propeller: 24-24 and 23-25??
what type of bore is there in the propeller,tapped or splined??
best regards
Arne Helland.:) :)

[chan]

Hi.
Contact Motor Marine in Moss, Norway. They have some propellers.
Mvh Chan

[plattgatter]

Hei, ser du fra sverge. da trenger vi ikke skrive engelsk.
du sa jo at du hadde propellere??

[xrudi]

We don't have used propellers but we make new ones for a resonable price:)
rudi@levidrives.com
Cheers Rudi

[xrudi]

Test of Surface Propulsion unit Levi Drive 170-150 “Fisherman” with marinised Isuzu Truck Engine 4JB1
coupled to a Koysan Hydraulic Gearbox H4
Speed achieved 27.7 knots

Base is a Isuzu 4JB1 second hand truck diesel engine. This engine was converted with our marinisation kit “Nicki” into a marine engine. This engine develops at 2300 rpm about 55 hp.The engine is coupled to a Koysan Hydraulic Marine Gearbox H4.

This propulsion unit was installed in a 25 foot inshore fishing boat in Malaysia and the drive is a till steered Levi Drive LD 170-150 .

“Levi Drives” produces 8 models covering the horse power range from 20 – 4000 hp.

The LD 170-150 “Fisherman” is special low cost unit produced in galvanized steel for local fisherman. All other units are made from stainless steel 316L and have hydraulic steering.


A maximum test speed of 27.7 knots was obtained.

The fuel savings with surface propulsion and diesel engines compared with an outboard engine make every boat owner glad..


“Capt. Choog” an other Happy “Levi Drive 170-150” owner.

Tests were done on 10.Dec. 2006 in Penang, Malaysia.

Cheers Rudi

[xrudi]

Dear All,

Sorry, this did not work so good. I try the same as attchment.

Cheers Rudi